Analogue-sequencer

Which midi output are you using? My P3's sync output goes a bit wobbly occasionally, but the others are all OK

Regards
Jez






> Message Received: Feb 28 2006, 04:37 PM
> From: "ch.³l" 
> To: analogue-sequencer@yahoogroups.com
> Cc: 
> Subject: [analogue-sequencer] Re: sync'n two P3's together?
> 
> --- In analogue-sequencer@yahoogroups.com, "analog1k" 
> wrote:
> >
> > I can't seem to get my two P3's to stay-in-sync, my second one
> > (slave P3) always seems to be 1 or 2 steps in front of the master 
> > P3 sequencer.
> > 
> > I have midi-clock set to 'on' on the master-P3 and midi-clock off
> > on the slave P3 unit.
> > 
> > How do i keep them both sync'd either during a start/stop operation.
> > 
> > 
> > Best,
> > A1k
> >
> 
> Hi there,
> 
> I have both of mine synced permanently as Paul has, and no trouble
> whatsoever. What firmware build are you running? I don't know if this
> has anything to do with your problem, but since updating to the latest
> firmware-beta, v41, mine doesn't react to the BTempo-setting. It'll
> show the set tempo on the display, but it plays at a different speed
> alltogether...
> 
> grtz ,Chiel
> 
> 
> 
> 
> 
> 
> 
> Yahoo! Groups Links
> 
> 
> 
> 
> 
> 
> 
> 
>

[Non-text portions of this message have been removed]

--- In analogue-sequencer@yahoogroups.com, jez creek <jez@...> wrote:

Which midi output are you using? My P3's sync output goes a bit 
wobbly occasionally, but the others are all OK
 
Regards
Jez


Hi Jez, the master P3, i am using the midi-sync output to
the slave P3's midi-input.  However i set the midiclock on
the master to 'ON'.   Both start at the same then one begins
to lag behind the other, usually the master P3, and the slave
P3 is in front by one or two steps ?

 
 

Hi there,

I have both of mine synced permanently as Paul has, and no trouble
has anything to do with your problem, but since updating to the latest
firmware-beta, v41, mine doesn't react to the BTempo-setting. It'll
show the set tempo on the display, but it plays at a different speed
altogether...

grtz ,Chiel


The master P3 is one of the newer models with firmware V3.1.006B
and the slave P3 has V3.1.005 firmware, will the slave P3 need an 
update to the same as the master P3?


Regards
A1k

I think their may be a problem with the sync output on some early production
models, I know there is on mine, when I had my maq hooked up to it, it would
often start of it's own accord and the timing between the two would drift.
Try using one of the other midi outputs and see if that improves things. I
think the problem can be fixed, but I've not had time to worry about it.
Jez

-----Original Message-----
From: analogue-sequencer@yahoogroups.com
[mailto:analogue-sequencer@yahoogroups.com]On Behalf Of analog1k
Sent: 28 February 2006 19:26
To: analogue-sequencer@yahoogroups.com
Subject: [analogue-sequencer] Re: sync'n two P3's together?


--- In analogue-sequencer@yahoogroups.com, jez creek <jez@...> wrote:

Which midi output are you using? My P3's sync output goes a bit
wobbly occasionally, but the others are all OK

Regards
Jez


Hi Jez, the master P3, i am using the midi-sync output to
the slave P3's midi-input.  However i set the midiclock on
the master to 'ON'.   Both start at the same then one begins
to lag behind the other, usually the master P3, and the slave
P3 is in front by one or two steps ?




Hi there,

I have both of mine synced permanently as Paul has, and no trouble
has anything to do with your problem, but since updating to the latest
firmware-beta, v41, mine doesn't react to the BTempo-setting. It'll
show the set tempo on the display, but it plays at a different speed
altogether...

grtz ,Chiel


The master P3 is one of the newer models with firmware V3.1.006B
and the slave P3 has V3.1.005 firmware, will the slave P3 need an
update to the same as the master P3?


Regards
A1k







Yahoo! Groups Links









--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 268.1.1/270 - Release Date: 27/02/06