Analogue-sequencer

I tried to search but couldn't find the answer, but i noticed after hitting FUNC + step mode to 
get to the AUX page the aux events I'm allowed to choose after hitting PAGE is dependent on 
the CC# on the previous page.  For example, if CC# is set to 0 and I hit PAGE I get grab, 
swap, push and xpose by track aux events only.  To be able to view Rndmz events I must set 
the CC# to 34 or 40.  And so on.  Is this how it's intended?  I thought I'd just be able to get to 
the aux events page and cycle through them via the DATA knob or just hitting the F2/next 
option.  Am I missing something here?  The above just seems painful because I have to 
remember what CC# to get to what group of AUX events.  I don't remember it being like this 
in 3.1.005.

monads

> I tried to search but couldn't find the answer, but i noticed 
> after hitting FUNC + step mode to 
> get to the AUX page the aux events I'm allowed to choose 
> after hitting PAGE is dependent on 
> the CC# on the previous page.

The events are now in groups, accessed using the step keys from the aux
config page.
This is in the new manual, but I've put a PDF of the relevant chart here:
http://www.sequentix.com/pdf/p3-event-groups.pdf

Best regards,
Colin Fraser
Sequentix Music Systems Ltd
http://www.sequentix.com

Thanks Colin!  Yea I figured it out after posting this message.  I was just stumped there for 
a minute.

--- In analogue-sequencer@yahoogroups.com, "Colin f" <colin@...> wrote:

>
>  
> > I tried to search but couldn't find the answer, but i noticed 
> > after hitting FUNC + step mode to 
> > get to the AUX page the aux events I'm allowed to choose 
> > after hitting PAGE is dependent on 
> > the CC# on the previous page.
> 
> The events are now in groups, accessed using the step keys from the aux
> config page.
> This is in the new manual, but I've put a PDF of the relevant chart here:
> http://www.sequentix.com/pdf/p3-event-groups.pdf
> 
> Best regards,
> Colin Fraser
> Sequentix Music Systems Ltd
> http://www.sequentix.com
>