Analogue-sequencer

>
> 
> 
> Is there a way to initialize the unit?
> 
> 
> YES IN THE MANUAL there is this option!!!;-)
>

>
> 
> ...ever helpful...
> 
> :)
> --- In analogue-sequencer@yahoogroups.com, "Bouncer" <boops.secretvibes@> wrote:
> >
> > 
> > 
> > Is there a way to initialize the unit?
> > 
> > 
> > YES IN THE MANUAL there is this option!!!;-)
> >
>

>
> So i just received a P3 (bought from NoiseTheorem off Ebay) and I am very excited to try and get it running.
> Page 7 (the very 1st page!) of the manual takes me through a very simple starting exercise:
> 
> Works when I hit TUNE and I hear the not on and off. Then when I hit RUN and I hear a pattern running when I shouldn't. I clear the pattern (by pressing the numbered keys) and then when i press them again I hear nothing. (also when i enter the PLAY/EDIT mode it says editing pattern 4 rather than 1 every time)
> 
> HELP a newb!
> 
> Is there a way to initialize the unit?
> 
> Thanks
> 
> Sunil
> aka
> AndroidDreams
> http://soundcloud.com/androiddreams
>

> Works when I hit TUNE and I hear the not on and off. Then when I hit RUN and I hear a pattern running when I shouldn't. I clear the pattern (by pressing the numbered keys) and then when i press them again I hear nothing. (also when i enter the PLAY/EDIT mode it says editing pattern 4 rather than 1 every time)
> 
> HELP a newb!
> 
> Is there a way to initialize the unit?
> 
> Thanks
> 
> Sunil
> aka
> AndroidDreams
> http://soundcloud.com/androiddreams
>

> >-----Original Message-----
> >From: analogue-sequencer@yahoogroups.com 
> >[mailto:analogue-sequencer@yahoogroups.com] On Behalf Of 
> >sunilsolanki@rogers.com
> >Sent: 07 August 2010 16:49
> >To: analogue-sequencer@yahoogroups.com
> >Subject: [analogue-sequencer] Re: New user asks stupid questions
> >
> >Thanks very much for your prompt replies! Excellent group 
> >you have here. Nice to see the man himself (Colin) on here 
> >supporting his fine products. 
> >
> >Anyone know why this (below) is happening?
> >
> >The unit works when I hit TUNE and I can hear the note on 
> >and off. Then when I hit RUN and I hear a pattern running 
> >when I shouldn't be. I assume this is just an old stored pattern.
> >
> >So I clear the pattern (by pressing the numbered keys) and 
> >then when I press them again I hear nothing. (also when i 
> >enter the PLAY/EDIT mode it says editing pattern 4 rather 
> >than 1 every time)
> >
> >So should I not just be able to edit this pattern and resave it?
> >
> >Are there any FAQ's for these type of new user questions BTW ?
> >
> >Thanks
> >
> >
> >
> >
> >--- In analogue-sequencer@yahoogroups.com, 
> >"sunilsolanki@..." <sunilsolanki@...> wrote:
> >>
> >> So i just received a P3 (bought from NoiseTheorem off 
> >Ebay) and I am very excited to try and get it running.
> >> Page 7 (the very 1st page!) of the manual takes me through 
> >a very simple starting exercise:
> >> 
> >> Works when I hit TUNE and I hear the not on and off. Then 
> >when I hit 
> >> RUN and I hear a pattern running when I shouldn't. I clear 
> >the pattern 
> >> (by pressing the numbered keys) and then when i press them again I 
> >> hear nothing. (also when i enter the PLAY/EDIT mode it 
> >says editing 
> >> pattern 4 rather than 1 every time)
> >> 
> >> HELP a newb!
> >> 
> >> Is there a way to initialize the unit?
> >> 
> >> Thanks
> >> 
> >> Sunil
> >> aka
> >> AndroidDreams
> >> http://soundcloud.com/androiddreams
> >>
> >
> >
> >
> >
> >------------------------------------
> >
> >Yahoo! Groups Links
> >
> >
> >

>
> Thanks for your patience P3 gurus...
> 
> I am running version 4.5 (thanks for installing the latest version Tony)(his music is friggin AMAZING by the way).
> 
> I read through the manuals for 3.100006 and then was thoroughly confused by the 4 and then 4.5 updates which seem to negate a lot of the features (like playlists) that i had just read about...
> 
> I initialized the unit and got rid of any of the old stored patterns and then began my journey into the P3 at last...
> 
> hooked it up to a trusty old synth and brought up a simple drum layout. bassdrum on C3, pressed PLAY/EDIT and then TRACK 1 and then hit run. See the little red lights blinking along at 130 bpm...nice.
> 
> press keys 1 5 9 13 and hear the four on the floor drumbeat(when i turn the knobs to C3)... now its time for the high hats that are on D3.
> 
> i SAVE ORIG and then hit PLAY/EDIT and then TRACK 2 and go to record hi hats the same way and NOTHING happens.
> 
> I am sure you are all laughing at the new guy by now...sorry.
> 
> I know i could have put the high hats into the 1st pattern, but i wanted to be able to drop them in and out. I can hear drums or i can hear high hats but not together.
> 
> help me on my journey to 4.5 enlightenment...
>

>
> Hi can you write more info,midi channels,drum module,any aux? 
> 
> --- In analogue-sequencer@yahoogroups.com, "sunilsolanki@" <sunilsolanki@> wrote:
> >
> > Thanks for your patience P3 gurus...
> > 
> > I am running version 4.5 (thanks for installing the latest version Tony)(his music is friggin AMAZING by the way).
> > 
> > I read through the manuals for 3.100006 and then was thoroughly confused by the 4 and then 4.5 updates which seem to negate a lot of the features (like playlists) that i had just read about...
> > 
> > I initialized the unit and got rid of any of the old stored patterns and then began my journey into the P3 at last...
> > 
> > hooked it up to a trusty old synth and brought up a simple drum layout. bassdrum on C3, pressed PLAY/EDIT and then TRACK 1 and then hit run. See the little red lights blinking along at 130 bpm...nice.
> > 
> > press keys 1 5 9 13 and hear the four on the floor drumbeat(when i turn the knobs to C3)... now its time for the high hats that are on D3.
> > 
> > i SAVE ORIG and then hit PLAY/EDIT and then TRACK 2 and go to record hi hats the same way and NOTHING happens.
> > 
> > I am sure you are all laughing at the new guy by now...sorry.
> > 
> > I know i could have put the high hats into the 1st pattern, but i wanted to be able to drop them in and out. I can hear drums or i can hear high hats but not together.
> > 
> > help me on my journey to 4.5 enlightenment...
> >
>

>
> midi channel 1 in the P3 and on the synth (Which is an old yamaha SY22-vector synth !!!)
> 
> i usually use it as a controller for Reason, but i knew it had a drum map, so i thought i'd test the P3 with it.
> 
> --- In analogue-sequencer@yahoogroups.com, "Bouncer" <boops.secretvibes@> wrote:
> >
> > Hi can you write more info,midi channels,drum module,any aux? 
> > 
> > --- In analogue-sequencer@yahoogroups.com, "sunilsolanki@" <sunilsolanki@> wrote:
> > >
> > > Thanks for your patience P3 gurus...
> > > 
> > > I am running version 4.5 (thanks for installing the latest version Tony)(his music is friggin AMAZING by the way).
> > > 
> > > I read through the manuals for 3.100006 and then was thoroughly confused by the 4 and then 4.5 updates which seem to negate a lot of the features (like playlists) that i had just read about...
> > > 
> > > I initialized the unit and got rid of any of the old stored patterns and then began my journey into the P3 at last...
> > > 
> > > hooked it up to a trusty old synth and brought up a simple drum layout. bassdrum on C3, pressed PLAY/EDIT and then TRACK 1 and then hit run. See the little red lights blinking along at 130 bpm...nice.
> > > 
> > > press keys 1 5 9 13 and hear the four on the floor drumbeat(when i turn the knobs to C3)... now its time for the high hats that are on D3.
> > > 
> > > i SAVE ORIG and then hit PLAY/EDIT and then TRACK 2 and go to record hi hats the same way and NOTHING happens.
> > > 
> > > I am sure you are all laughing at the new guy by now...sorry.
> > > 
> > > I know i could have put the high hats into the 1st pattern, but i wanted to be able to drop them in and out. I can hear drums or i can hear high hats but not together.
> > > 
> > > help me on my journey to 4.5 enlightenment...
> > >
> >
>

> -----Original Message-----
> From: analogue-sequencer@yahoogroups.com 
> [mailto:analogue-sequencer@yahoogroups.com] On Behalf Of 
> sunilsolanki@rogers.com
> Sent: 13 August 2010 23:07
> To: analogue-sequencer@yahoogroups.com
> Subject: [analogue-sequencer] Re: New user asks stupid questions
> 
> midi channel 1 in the P3 and on the synth (Which is an old 
> yamaha SY22-vector synth !!!)
> 
> i usually use it as a controller for Reason, but i knew it 
> had a drum map, so i thought i'd test the P3 with it.
> 
> --- In analogue-sequencer@yahoogroups.com, "Bouncer" 
> <boops.secretvibes@...> wrote:
> >
> > Hi can you write more info,midi channels,drum module,any aux? 
> > 
> > --- In analogue-sequencer@yahoogroups.com, "sunilsolanki@" 
> <sunilsolanki@> wrote:
> > >
> > > Thanks for your patience P3 gurus...
> > > 
> > > I am running version 4.5 (thanks for installing the 
> latest version Tony)(his music is friggin AMAZING by the way).
> > > 
> > > I read through the manuals for 3.100006 and then was 
> thoroughly confused by the 4 and then 4.5 updates which seem 
> to negate a lot of the features (like playlists) that i had 
> just read about...
> > > 
> > > I initialized the unit and got rid of any of the old 
> stored patterns and then began my journey into the P3 at last...
> > > 
> > > hooked it up to a trusty old synth and brought up a 
> simple drum layout. bassdrum on C3, pressed PLAY/EDIT and 
> then TRACK 1 and then hit run. See the little red lights 
> blinking along at 130 bpm...nice.
> > > 
> > > press keys 1 5 9 13 and hear the four on the floor 
> drumbeat(when i turn the knobs to C3)... now its time for the 
> high hats that are on D3.
> > > 
> > > i SAVE ORIG and then hit PLAY/EDIT and then TRACK 2 and 
> go to record hi hats the same way and NOTHING happens.
> > > 
> > > I am sure you are all laughing at the new guy by now...sorry.
> > > 
> > > I know i could have put the high hats into the 1st 
> pattern, but i wanted to be able to drop them in and out. I 
> can hear drums or i can hear high hats but not together.
> > > 
> > > help me on my journey to 4.5 enlightenment...
> > >
> >
> 
> 
> 
> 
> ------------------------------------
> 
> Yahoo! Groups Links
> 
> 
>