Analogue-sequencer

have made the move from 100% ITB to a fair bit (for me) on hardware. and wanting to make music with minimal computer drudgery...

I always used my P3 with the 1 bit of hardware i had...really enjoyable...but now i have 4 bits of gear hooked into the midi outs but no matter how much i change the midi channels i can only ever hear my Korg EMx1.

I cannot hear my Xoxbox, KSr or SY22 at all being sequenced. They all wrok fine through the mixer, so i really am not sure what is going on...

So if i have set channels 1-9 for the EMx1 and then the next 3 channels for the other gear...and am hearing nothing??? what gives? 



Synths: Roland SH-101, adafruit XOXBOX, Yamaha SY22 and AN200, Novation KS-R and Korg EMX-1

Drum-machine: Boss DR55

Sequencing: Sequentix P3

Software: Reason 6.5 , Recycle 2.2

Outboard: Lexicon MPX100, Alesis Midiverb II, Dunlop MXR-M104, TC Helicon VoicePrism+

Yes. 

I will set , for example channel 10 on the P3 and channel 10 on my sy22...- NADA!

but the various channel assignments for the EMX1 all work!



--- In analogue-sequencer@yahoogroups.com, Paul Nagle <softroom@...> wrote:

>
> On 19/10/2012 18:23, sunilsolanki@... wrote:
> >   have made the move from 100% ITB to a fair bit (for me) on hardware. and wanting to make music with minimal computer drudgery...
> >
> > I always used my P3 with the 1 bit of hardware i had...really enjoyable...but now i have 4 bits of gear hooked into the midi outs but no matter how much i change the midi channels i can only ever hear my Korg EMx1.
> >
> > I cannot hear my Xoxbox, KSr or SY22 at all being sequenced. They all wrok fine through the mixer, so i really am not sure what is going on...
> >
> > So if i have set channels 1-9 for the EMx1 and then the next 3 channels for the other gear...and am hearing nothing??? what gives?
> 
> And you've set the P3 to transmit on matching channels?
> 
> -- 
> Paul
> http://www.softroom.co.uk
> http://paulnagle.bandcamp.com/
>

Yes. 

I will set , for example channel 10 on the P3 and channel 10 on my sy22...- NADA!

but the various channel assignments for the EMX1 all work!



--- In analogue-sequencer@yahoogroups.com, Paul Nagle <softroom@...> wrote:

>
> On 19/10/2012 18:23, sunilsolanki@... wrote:
> >   have made the move from 100% ITB to a fair bit (for me) on hardware. and wanting to make music with minimal computer drudgery...
> >
> > I always used my P3 with the 1 bit of hardware i had...really enjoyable...but now i have 4 bits of gear hooked into the midi outs but no matter how much i change the midi channels i can only ever hear my Korg EMx1.
> >
> > I cannot hear my Xoxbox, KSr or SY22 at all being sequenced. They all wrok fine through the mixer, so i really am not sure what is going on...
> >
> > So if i have set channels 1-9 for the EMx1 and then the next 3 channels for the other gear...and am hearing nothing??? what gives?
> 
> And you've set the P3 to transmit on matching channels?
> 
> -- 
> Paul
> http://www.softroom.co.uk
> http://paulnagle.bandcamp.com/
>

Well the SY22 is my "controller" for my DAW and midi works just fine. SO it's not the cable or the synth!

This is really hampering my pleasure of use with the P3!

S.


--- In analogue-sequencer@yahoogroups.com, Paul Nagle <softroom@...> wrote:

>
> On 19/10/2012 19:21, sunilsolanki@... wrote:
> > Yes.
> >
> > I will set , for example channel 10 on the P3 and channel 10 on my sy22...- NADA!
> >
> > but the various channel assignments for the EMX1 all work!
> 
> Very weird, have you some kind of MIDI monitor, perhaps MIDI Ox on the 
> PC so you can check the data being sent from P3?
> 
> -- 
> Paul
> http://www.softroom.co.uk
> http://paulnagle.bandcamp.com/
>

On 19/10/2012 18:23, sunilsolanki@rogers.com wrote:
>   have made the move from 100% ITB to a fair bit (for me) on hardware. and wanting to make music with minimal computer drudgery...
>
> I always used my P3 with the 1 bit of hardware i had...really enjoyable...but now i have 4 bits of gear hooked into the midi outs but no matter how much i change the midi channels i can only ever hear my Korg EMx1.
>
> I cannot hear my Xoxbox, KSr or SY22 at all being sequenced. They all wrok fine through the mixer, so i really am not sure what is going on...
>
> So if i have set channels 1-9 for the EMx1 and then the next 3 channels for the other gear...and am hearing nothing??? what gives?

And you've set the P3 to transmit on matching channels?

-- 
Paul
http://www.softroom.co.uk
http://paulnagle.bandcamp.com/

On 19/10/2012 19:21, sunilsolanki@rogers.com wrote:
> Yes.
>
> I will set , for example channel 10 on the P3 and channel 10 on my sy22...- NADA!
>
> but the various channel assignments for the EMX1 all work!

Very weird, have you some kind of MIDI monitor, perhaps MIDI Ox on the 
PC so you can check the data being sent from P3?

-- 
Paul
http://www.softroom.co.uk
http://paulnagle.bandcamp.com/