Analogue systems

well if it was me i would get the mixer, two VCOs is quite enough most of the time, at least for me, and you have two filters, so... 

also I would seriously consider the RS110 over the 100, its bigger which could be a problem, but it is much more flexible and the LPF is just as good or better IMO, I like this filter a lot. Of course with the RS110 you would probably need the mixer... you could consider a smaller mixer from another manufacturer, but maybe this spoils your idea though!

take your time is my other advice, its a lot to think about in abstract - I have some modules taking up space on mine (like the Rs20 ring mod and some doepfer logic modules) which for various reasons I just about never use

is there a slew generator hidden away there somewhere? - maybe the trapezoid can do this job? - personally I couldn't think of a modular without one

of course we all have different goals with these instruments, that is part of the fun

Richard

  ----- Original Message ----- 
  From: elminkopeligroso 
  To: analogue_systems@yahoogroups.com 
  Sent: Thursday, February 28, 2008 10:35 PM
  Subject: [analogue_systems] Advice / The Third VCO


  Hi Folks

  I just signed up here as I'm very seriously thinking of getting myself
  an AS system. It'll be my first modular synth. I'm reasonably well
  versed with synths generally and a lot more since I've now spent hours
  going through the modules at the AS site!

  I've decided to go with the AS system becasue they're very well
  reviewed in SOS, you lot seem very happy, I've a deep connection to
  Cornwall as a region and I also love the EMS sound that AS have
  brought to their systems. Bob Williams has been very helpful in
  answering my questions too, which bodes well.

  I've now gone gone through various system permuations in my head - I'm
  packing the 168HP case - and this is where I now stand. 

  RS140 24HP MIDI
  RS95 12HP OSC
  RS95 12HP OSC
  RS95E 12HP OSC
  RS500e 12HP FILTER
  RS100 12HP / FILTER
  RS40 12HP SH/NOISE
  RS85 12HP LFO
  RS60 12 HP ADSR
  RS510e 18hp TRAPEZOID
  RS 170 6HP PATCHING
  RS20 6 HP RING MOD
  RS 150 6 HP SEQUENTIAL SWITCH 
  RS180 12HP VCA

  You can see my line of thought - I can cram a minimoog and a VCS3 into
  one case?!! Holy ****! Of course I'm aware that I can't *really*
  squeeze both those beasts into one box, but I'll have a damned good try.

  My main concern is that I'm losing in flexibility what I'm gaining in
  oomph - I particularly wonder whether I should be fitting a mixer -
  probably RS160 - in there, probably instead of the third VCO. 

  I also wish I could get a joystick in there - though I think that will
  have to come later with some kind of breakout box. With
  this being my first modular, I think I should be keeping the MIDI
  converter.

  So my question to you is - and thanks in advance for any advice you
  might have for me - am I sacrificing brains for brawn by including the
  third VCO at the expense of a dedicated mixer? Bob W seemed to think
  I'd be fine with my current config, but I thought I'd also put it to
  the board.

  Thanks!

  Mark



   

-- 
I am using the free version of SPAMfighter for private users.
It has removed 356 spam emails to date.
Paying users do not have this message in their emails.
Get the free SPAMfighter here: http://www.spamfighter.com/len


[Non-text portions of this message have been removed]