Analogue systems

I'm having a hard time visualizing what you are doing.  Do these mult 
modules need to be on a horizontal surface?  How do they stay put on 
a vertical surface?  Maybe you could post a picture.  Thanks.

--- In analogue_systems@yahoogroups.com, Peter Grenader 
<pgrenader@m...> wrote:
> I've got a better one!
> 
> I've made small enclosures to mount my mults in separately.  They 
basically
> form-fit the mult modules. Each is covered with a soft felt 
material.  Why
> did I do this?  I just lay them where I need them depending on the 
patch -
> they aren't hard mounted in my panel and more important, don't rob 
me of any
> precious panel space!
> 
> works great!
> 
> Peter
> 
> 
> shm1400wrote:
> 
> Since you complained about a lack of mults, I thought I'd share a
> trick to overcome this problem (although it may seem a bit obvious:
> 
> MOVE-A-MULTS
> 
> Back in the 60s, Moog manufactured move-a-mults, which were 
basically
> one phone plug wired attached to 2 phone jacks.
> 
> Us AS & Doepfer users can get the same result by bying "Y" adapters
> and using them this way.  I buy cheap Y adapters from Radio Shack 
for
> about a buck.  Plug the plug into your jack, and you now have two
> jacks.  You need to make sure you get a mono Y adapter, not one of
> the stereo splitters.  And if you buy from Radio Shack, make sure it
> is 1/8".  they also sell gold plated splitters that are some other
> wierd size.
> 
> Does anybody else do this?
> 
> --- In analogue_systems@yahoogroups.com, Arnauld Michelizza 
<am@z...>
> wrote:
> >> 
> > My system is too small to make complex patches that often require 
a
> lot of
> > vca / adsr / attenuators. The biggest lack is about attenuators 
and
> I dislike
> > to use a whole vca or a whole mixer only to attenuate a signal !
> > I have not enough multiple and adsr too.
> > The filters are great and I often use my system as an effect
> processor for
> > drum loops.
> > I don't make a lot of music yet, as I do not have so much time and
> I'm a
> > beginner. I rather like to spend time to learn and to search some
> sounds.
> > 
> > Arnauld
> 
> 
> Yahoo! Groups Sponsor ADVERTISEMENT
> 
> To unsubscribe from this group, send an email to:
> analogue_systems-unsubscribe@yahoogroups.com
> 
> 
> 
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/> .
> 
> 
> 
> 
> [Non-text portions of this message have been removed]