Analogue systems

I agree it seems like it should work both ways, but perhaps there is some
asymmetry in the connections.  You should ask the Doepfer yahoo group about
this-- the adapter from Analogue Haven was actually made by Doepfer.

On Thu, Apr 22, 2010 at 10:22 PM, slowalan <slowalan@cirruscomms.com.au>wrote:

>
>
> I want to put two small Doepfer modules in an old AS case containing the
> basic AS system.. The case is a 6u thing with no fuses on the power rails,
> (nor Doepfer sockets!)
>
> I am using two of those adpators purchased from Analogue Haven...I know
> they are meant to be used to plug AS into Doepfer, but I can't see why they
> can't go the other way.
>
> However, I am getting very wierd, fluctuataing, low voltages, so low they
> hardly light up the clock and lfo led's on the AS system.No magic smoke, but
> not good .
>
> All went back to normal when I took the Doepfers out. I have checked that
> the -12volts pins are properly aligned and not upside down...can't
> understand what the problem is....any ideas?
>
> PS the Dopefers are a A-150 dual VCS, and a A-160 Clock divider, replacing
> the RS -100 Low pass filter, which I dont use much...should'nt be excessive
> power requirements, (I guess...)
>
> Any ideas would be appreciated!
>
> Slowalan
>
>  
>


[Non-text portions of this message have been removed]