Analogue systems

Actually, im being thick,  why not get the AS  RS 95E


http://www.analoguesystems.co.uk/pdf/RS95-95E.indd.pdf


This has a range of 0.3Hz to 17kHz.in wide range mode and would work as an LFO if used as a CV source rather than signal output. I have the 95E in my system and it's ace!




On 5 Aug 2010, at 20:06, Neil Boughey wrote:

> Another idea, way out of left field, would be the new reissue of the Oberheim SEM (the patch control version). 
> 
> http://www.tomoberheim.com/
> 
> Oberheim's were, I believe, desirable because of their ability to perform "vicious" filter sweeps. I assume you would get the capability of a "fixed architecture" synth, which you could patch into a modular (you would probably need a convertor module or adaptor to use with eurorack) although having never seen one of these, not sure you could patch the LFO out independently - next months UK Sound on Sound mag promises a review.
> 
> On 5 Aug 2010, at 19:07, Monroe Eskew wrote:
> 
> > Another solution could be voltage control. The AS joystick has a big
> > voltage range: -10 to +10 V. This could get you the sweep you need.
> > 
> > On Thu, Aug 5, 2010 at 6:18 AM, bennethos <bennethos@yahoo.com> wrote:
> > 
> >> 
> >> 
> >> 
> >> From very fast to 0 without any switches in between.
> >> One elegant motion of 330� full right to full left.
> >> 
> >> Hope I'm clearer now ;-)
> >> 
> >> 
> >> --- In analogue_systems@yahoogroups.com<analogue_systems%40yahoogroups.com>,
> >> Monroe Eskew <monroe.eskew@...> wrote:
> >>> 
> >>> What is the maximum and minimum frequency you desire?
> >>> 
> >>> On Tue, Aug 3, 2010 at 1:34 AM, bennethos <bennethos@...> wrote:
> >>> 
> >>>> 
> >>>> 
> >>>> 
> >>>> Hi,
> >>>> 
> >>>> I bought the RS85 and I'm not that satisfied with it. Not because of
> >> the
> >>>> module but because I'm used to having 1 pot to control the LFO
> >> frequency.
> >>>> (Like the commercial synths have...)
> >>>> 
> >>>> For instance I want to create A very fast to very slow sweep in a full
> >>>> anti-clockwise turn.
> >>>> This is not possible with this module, I have this switch next to the
> >> pot
> >>>> that needs to be set in high, mid or low mode...
> >>>> 
> >>>> Think this module is more meant for fine-tuning of frequency instead of
> >>>> sweeps.
> >>>> 
> >>>> Any idea what I could buy as a second LFO ?
> >>>> My requirements are :
> >>>> 
> >>>> 1 potmeter for the LFO frequency
> >>>> 1 CV-IN that controls the LFO frequency.
> >>>> If possible -> EURORACK
> >>>> 
> >>>> Kind regards,
> >>>> Benjamin
> >>>> 
> >>>> 
> >>>> 
> >>> 
> >>> 
> >>> [Non-text portions of this message have been removed]
> >>> 
> >> 
> >> 
> >> 
> > 
> > 
> > [Non-text portions of this message have been removed]
> > 
> > 
> > 
> > ------------------------------------
> > 
> > Yahoo! Groups Links
> > 
> > 
> > 
> 
> 



[Non-text portions of this message have been removed]