Analogue systems

I have the following which could go to a new home:

RS165 Signal Mixer
RS280 Divider
RS270 Adapter

- Rory

On Fri, Oct 15, 2010 at 8:20 AM, daniel axon <daniel_axon@yahoo.co.uk>wrote:

>
>
> Hi there,
>
> Not sure if this is the place to ask, but i just wondered if anyone had any
>
> modules they were selling? I'm looking for an ADSR, osc and maybe a few
> other
> bits - interested to hear what you've got if you're shifting anything....
>
> Have now doubled my mini-system to 6U and loving it!
>
> thanks, Dan
>
>
> ________________________________
> From: Sean Williams <sean@artifactrecords.com <sean%40artifactrecords.com>
> >
> To: analogue_systems@yahoogroups.com <analogue_systems%40yahoogroups.com>
> Sent: Wed, 22 September, 2010 9:15:24
>
> Subject: Re: [analogue_systems] Before i bother Bob with cockpit
> trouble!...
>
>
> Dan
>
> > Hi Sean,
> >
> >
> > Thanks for the advice, much appreciated - so take everything out then
> start
> > with
> > just an osc and the VCA and do the initial level test?
> >
> > Or even just try the VCO on its own
>
> > Can you also tell me are the new RS95 oscs much better than the old 90's?
> > i've
> > seen some 90's second hand but wonder if i should stump up the extra for
> > the
> > newer 95's?
> >
> > I have 2 RS-90 and 1 RS-95e. It's nice to have the sine wave output on
> the
> 95e but aside from that there's not much (any?) material difference -
> except
> with the "e" you have a multi-turn pot which is great sometimes and
> frustrating at other times. Oh, and not wishing to resurrect old debates,
> but the sine wave on the RS-95 isn't the purest thing so if it's pristine
> FM
> or ring modulation you're after then you're probably better off using an
> oscillating filter for your sine wave.
>
> Personally, I find it useful to have the sine wave anyway, but I use the
> saw
> and pulse out much more often and the characteristic sound of the AS
> oscillators is the shape modulation so having a mix of RS-90 and RS-95 is a
> good thing.
>
> > I get a sweaty forehead when working with anything over 12V so will stay
> > clear
> > of the PSU!!!
> >
> > thanks again, Dan
> >
> > atb
> Sean
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
>  
>


[Non-text portions of this message have been removed]