Analogue systems

No problem except you void your warranty (see my earlier post)!

shm1400 wrote:

> I have a number of ASys modules in my Doepfer cases and have no
> problem with the mounting holes. Both Doepfer and ASys can mount on
> the Doepfer rails. The only difficulty is that the mounting holes on
> Doepfer are slightly farther from the edge of the module than are
> the ASys. Because of this, if a Doepfer and ASys module are mounted
> side by side, you end up with a space of about 1/2 hp between the
> modules. I get around this by not mixing ASys or Doepfer in a single
> row.  If each row is either all Asys or all Doepfer, then there is
> no problem.  
> 
> 
> --- In analogue_systems@yahoogroups.com, "selfoscillate"
> <synaptic_music@y...> wrote:
>> 
>> analogue solutions can supply both types of connectors,
>> but they ship doepfer as default.
>> 
>> best wishes
>> 
>> ingo
>> 
>> 
>> --- In analogue_systems@yahoogroups.com, Loren Nerell
> <lnerell@e...> 
>> wrote:
>>> At 07:31 PM 4/7/2004, you wrote:
>>>> Doepfer and Bob do not use the same connectors, nor
>>>> the same pin orientation (what voltage goes where on those
>> connectors) and
>>>> there have been too many miswires when people attempted to make
>> mating
>>>> cables.
>>> 
>>> What about analog systems vs analog solutions? Are their
>> connections 
>>> different or the same?
>>> 
>>> 
>>> Take care.
>>> 
>>> - Loren Nerell
>>> 
>>> -------------------------------------------------
>>> http://home.earthlink.net/~lnerell/
>>> http://www.soundclick.com/lorennerell
>>> -------------------------------------------------
>>> 
>>> [Non-text portions of this message have been removed]
> 
> 
> 
> 
> 
> Yahoo! Groups Links
> 
> 
> 
> 
>