Analogue systems

It was the fuses. I replaced them all today and everything is back to 
normal. Thank you so much for your help, saved me a trip to the tech.

Rob



On Thursday, June 24, 2004, at 05:50 PM, Peter Grenader wrote:

> Sounds like it!
>
> Is your rack the new model Bob just released?� If so, there are 
> separate
> fuses on the DC (secondary) side of the transformer on the PSU itself 
> and
> the top and bottom rows of connectors on the PSU are fused separately.
>
> Contact me offline and I'll give you some tips on this, but I suggest 
> you
> take it to qualified service tech.
>
>
> Rob Hoffman wrote:
>
> > I think I might have blown up some modules. I plugged in my new RS240
> > Bode filter, and none of the lights came on. I pulled it out and
> > reseated the cable and the LED's lit up and it passes signal fine. 
> The
> > problem is my two RS95 oscillators, and the VCA no longer generate or
> > pass signal. And on my VC-LFO, RS-80, the LED does not blink like my
> > Doepfer LFO's do.
> >
> > Did I kill something ?
> >
> > Rob
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
>
>
<image.tiff>
>
>
<image.tiff>
>
> Yahoo! Groups Links
>
> � 	To visit your group on the web, go to:
> http://groups.yahoo.com/group/analogue_systems/
> �
> � 	To unsubscribe from this group, send an email to:
> analogue_systems-unsubscribe@yahoogroups.com
> �
> � 	Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>


[Non-text portions of this message have been removed]