Analogue systems

Try the Bode, this is the best in the feedback loop so far. Check out 
every Bode-Mode and also the zero-mode.

--- In analogue_systems@yahoogroups.com, "waveform100" <googol@g...> 
wrote:
> 
> This is deeper than I thought. BTW: I have Sample Rate and the 
> damping on the two attenuators. Tweaking Sample Rate, Delay Time 
and 
> filter cutoff at the same time (joystick) is pretty cool.
> 
> --- In analogue_systems@yahoogroups.com, Bakis Sirros 
> <synth_freak_2000@y...> wrote:
> > hello wave100,
> > i have the rs290/295 for about 18 months, so far, and
> > i use it very often. i haven't tried many modules in
> > it's external feedback loop ,but very good results i
> > get when i patch the rs360 phase filter bank in the
> > rs290's feedback loop. i usualy modulate one or two of
> > the three BP mode filters of the rs360 with an lfo to
> > get more evolving results.
> > bakis.
> > 
> > 
> > 
> > 
> > --- waveform100 <googol@g...> wrote:
> > 
> > > 
> > > I have the Sampler-Delay for about 2 Weeks now. I
> > > purchased it only 
> > > because of the external feedback loop. Its so cool.
> > > When you put a 
> > > good analogue filter into the feedback loop you get
> > > really analogue 
> > > delays. They are as good as my real analogue delays.
> > > 
> > > What else do you guys put in the feedback Loop? So
> > > far the doepfer 
> > > Modules Morphing Filter and the SSM-Filter work very
> > > well. The 
> > > doepfer Moog-Filter doesn't work too well, the input
> > > is too low, so 
> > > its not possible to get very long feedbacks. I will
> > > test is also 
> > > with  Wiard, Oakley and blacet filters, when its in
> > > the main studio.
> > > 
> > > 
> > > 
> > > 
> > 
> > 
> > =====
> > Bakis Siros
> > Parallel Worlds / Polariton
> > Athens-Greece
> > [Doepfer_a100] group owner
> > http://www.shimarecords.co.uk
> > http://www.ward12.com
> > 
> > 
> > 		
> > __________________________________ 
> > Do you Yahoo!? 
> > The all-new My Yahoo! - Get yours free! 
> > http://my.yahoo.com