Analogue systems

Thanks, quite right, all is well, I just need more modules...
and how!
kelly
--- In analogue_systems@yahoogroups.com, Daniel Levey 
<Leftbrain@s...> wrote:
>
> You probably just blew the fuses (middle one on the left or right 
or both).  I have blown fuses more times than I can count plugging in 
ASystems slightly askew, ASolutions in backwards and Doepfers with 
the pin on the wrong side.  With modules that you have a 50% chance 
of getting right, it's plug, blow, reverse, works.  Just get a 
handfull of fuses and go at it methodically, plugging in one at a 
time and poweing up.
>  
> Dan
> 
> plastichorneddevil <kellyborkert@h...> wrote:
> having just received an RS-15 with no instructions and fewer 
brains, I 
> plugged 4 analogue solutions modules into the Doepfer slots, and 
> puzzled over the Analogue Systems orientation. Not thinking to look 
at 
> the ends plugged into the modules for their obvious signs, I 
believe I 
> put them in the rack power supply backwards and powered it up. No 
signs 
> of life from the RS-60 EG's, so I eventually gave up and realized 
the 
> mistake this morning. Have I done some damage?
> Reversing those connectors and attempting to power it back up 
brought 
> the same results. I havent tried listening to any other modules, I 
> simply looked for some LED feedback, under gate or one shot 
conditions.
> Appreciate any help!
> kelly
> 
> 
> 
> 
> 
> ---------------------------------
> YAHOO! GROUPS LINKS 
> 
> 
>     Visit your group "analogue_systems" on the web.
>   
>     To unsubscribe from this group, send an email to:
>  analogue_systems-unsubscribe@yahoogroups.com
>   
>     Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
Service. 
> 
> 
> ---------------------------------
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
>