Analogue systems

Hey Monroe, 

Stop! Don't plug that module in!!

I actually don't have any AS modules yet (I'm new here), but my 
understanding is that the voltages on each wire of the ribbon cable 
are actually in a different order from Doepfer which requires either 
a purchased or DIY converter. (ie: you can't just plug the cable in 
upside down). Check this diagram out:

http://www.analoguehaven.com/usercomm/conversion.jpg

-- or wait for someone else on the list with experience to answer. 

Good luck,
Adam

--- In analogue_systems@yahoogroups.com, "Monroe Eskew" 
<monroe.eskew@...> wrote:
>
> Hi all,
> 
> I have an RS10 and I just got my first Doepfer module.  Doepfer's 
website
> tells you to connect the ribbon cable with the colored stripe DOWN, 
while
> all my AS modules are connected with the stripe up.  And because of 
the
> raised part of the Doepfer cables, it seems I will have to twist 
the Doepfer
> cable around to fit it in, putting it with the stripe UP.  I just 
wanted to
> make sure that this is right so I don't destroy my module.
> 
> Thanks,
> Monroe
> 
> 
> [Non-text portions of this message have been removed]
>