Re: RS510-E Trapezoid generator
2013-01-21 by phineaskfreak
Sig out is the audio output from the vca, out a and b are the envelope out from the trap gen. i.e. SIG-OUT is audio, OUT A & OUT B are cv. not sure about the issue with the off mode, but i do find the scale so touchy in the longer times that i assumed it was a log scale... --- In analogue_systems@yahoogroups.com, "bennethos" wrote:
Show quoted textHide quoted text
> > > > Hi guys, > > could anyone having this module give me some advice ? > I would just like to know what the behaviour of OUT A & OUT B should be. > > I read the manual from the module. From what I understand OUT A & OUT B should give the same as SIG-OUT but with an added inversion or non inversion of the TRAPEZOID EG ? > > SIG OUT works fine for me > If I take the same patch but use OUT A or OUT B ( and the level at it's max left or right) I get a huge pop/click when the attack starts and a very faint patch sound. Only the center seems to work fine, giving no output :p > > Another issue I'm having is with the OFF Mode, in the manual it says you can make delays with a max of 5 s. The pot works fine for me till it gets to level 6, I turn it a mm further and it's like I've put it on the max level or 10...I get no repetition of the EG once past 6. Shouldn't this be occuring at level 10 ? > > Thx for helping me out here >