Re: RS510-E Trapezoid generator
2013-01-23 by bennethos
Thx for clarification. Would you be able to give me a patch example to use those alternate CV outs ? I can send them to another CV in VCA , just like the out from a classic AS ADSR EG ? What else could one do with these outs ? I'll ask Analogue systems about the OFF pot, maybe it needs calibration... I've been bying modules every now and then. Been patient for 2 years and I have a 6U rack full at last :-). I just have to buy more vco's , only got 1 at the moment. --- In analogue_systems@yahoogroups.com, "phineaskfreak" wrote:
Show quoted textHide quoted text
> > Sig out is the audio output from the vca, out a and b are the envelope out from the trap gen. i.e. SIG-OUT is audio, OUT A & OUT B are cv. > > not sure about the issue with the off mode, but i do find the scale so touchy in the longer times that i assumed it was a log scale... > > --- In analogue_systems@yahoogroups.com, "bennethos" wrote: > > > > > > > > Hi guys, > > > > could anyone having this module give me some advice ? > > I would just like to know what the behaviour of OUT A & OUT B should be. > > > > I read the manual from the module. From what I understand OUT A & OUT B should give the same as SIG-OUT but with an added inversion or non inversion of the TRAPEZOID EG ? > > > > SIG OUT works fine for me > > If I take the same patch but use OUT A or OUT B ( and the level at it's max left or right) I get a huge pop/click when the attack starts and a very faint patch sound. Only the center seems to work fine, giving no output :p > > > > Another issue I'm having is with the OFF Mode, in the manual it says you can make delays with a max of 5 s. The pot works fine for me till it gets to level 6, I turn it a mm further and it's like I've put it on the max level or 10...I get no repetition of the EG once past 6. Shouldn't this be occuring at level 10 ? > > > > Thx for helping me out here > > >