Yahoo Groups archive
Thread
2003-11-30 by stevenemilie
Does anyone know if I can use the doepfer A192 cv - midi interface to control a midi sampler with my AS sequencer? Also I'd like to mix some blacet modules with my AS setup - is there any way of powering them from the AS supply? I don't want to spend a fair bit just to power the 2 blacet modules that I want... I'm new to this and haven't quite got my head around it!
2003-11-30 by Peter Grenader
You can do this. If the midi sampler you're speaking of has a midi implementation chart, you can use any voltage source as a controller via the A192. Regarding the Blacet: Some of his modules will work OK with 12 volts, not all. Otherwise, there was a way to power them with a wallwart. Write John. I recenty spoke with him and he mentioned he's out of town for the holiday until Monday, but he's very helpful about this stuff. stevenemilie wrote:
> Does anyone know if I can use the doepfer A192 cv - midi interface to control > a midi > sampler with my AS sequencer? > > Also I'd like to mix some blacet modules with my AS setup - is there any way > of > powering them from the AS supply? I don't want to spend a fair bit just to > power the 2 > blacet modules that I want... > > I'm new to this and haven't quite got my head around it! > > > > To unsubscribe from this group, send an email to: > analogue_systems-unsubscribe@yahoogroups.com > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >
2003-11-30 by stevenemilie
Great midi news - thanks! I'll order my blacet modules and see if they work... Does anyone know if the cheap doepfer 5v adapter will work in a AS system (with the adapter ribbon)? I need to power a doepfer midi - cv. Thanks
> You can do this. If the midi sampler you're speaking of has a midi > implementation chart, you can use any voltage source as a controller via the > A192. > > Regarding the Blacet: Some of his modules will work OK with 12 volts, not > all. Otherwise, there was a way to power them with a wallwart. Write John. > I recenty spoke with him and he mentioned he's out of town for the holiday > until Monday, but he's very helpful about this stuff. > > > > stevenemilie wrote: > > > Does anyone know if I can use the doepfer A192 cv - midi interface to control > > a midi > > sampler with my AS sequencer? > > > > Also I'd like to mix some blacet modules with my AS setup - is there any way > > of > > powering them from the AS supply? I don't want to spend a fair bit just to > > power the 2 > > blacet modules that I want... > > > > I'm new to this and haven't quite got my head around it! > > > > > > > > To unsubscribe from this group, send an email to: > > analogue_systems-unsubscribe@yahoogroups.com > > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > >