Analogue systems

Folks,

Does anyone know if it is possible to get a bigger power supply for an older
RS15 Chassis?  Mine doesn't have enough power for my modules.  [Remove a
largish module (e.g. RS-110) and it runs fine; put it back and the chassis
will run for a bit but then it will generate a loud low noise at the outputs
of some of the modules and the LEDs visibly change state.]  

I've played around with different module arrangements but without any
current draw information on the modules, this is a guessing game!  Note: It
would be *really good* to have this information on the web site like other
modular manufacturers do!

Any pointers are welcome.

	Eric

hello,
the current draw info for each module is in their
website.
here is the link:
http://www.analoguesystems.co.uk/pdf/Appendix%2011.pdf

bakis.





--- alt-mode <yahoo@alt-mode.com> wrote:

> Folks,
> 
> Does anyone know if it is possible to get a bigger
> power supply for an older
> RS15 Chassis?  Mine doesn't have enough power for my
> modules.  [Remove a
> largish module (e.g. RS-110) and it runs fine; put
> it back and the chassis
> will run for a bit but then it will generate a loud
> low noise at the outputs
> of some of the modules and the LEDs visibly change
> state.]  
> 
> I've played around with different module
> arrangements but without any
> current draw information on the modules, this is a
> guessing game!  Note: It
> would be *really good* to have this information on
> the web site like other
> modular manufacturers do!
> 
> Any pointers are welcome.
> 
> 	Eric
> 
> 
> 


=====
Bakis Siros
Parallel Worlds / Polariton
Athens-Greece
[Doepfer_a100] group owner
http://www.shimarecords.co.uk
http://www.ward12.com


		
__________________________________ 
Do you Yahoo!? 
The all-new My Yahoo! - Get yours free! 
http://my.yahoo.com

Doh!  I can't believe I missed the power listings right at the top 
of the modules page.  OK, I'm officially blind.  Thanks for the 
pointer.

One of the interesting problems I'm seeing is that if I pull out an 
RS-110 filter (45ma), the chassis seems to work fine but if I 
instead pull out an RS-390 Echo (160ma), the problem is still 
there.  It takes a bit longer to happen but still does.  Hmmm, 
perhaps I just have a general power supply problem and not an issue 
with the load....  More investigation needed.

   Eric


--- In analogue_systems@yahoogroups.com, Bakis Sirros 
<synth_freak_2000@y...> wrote:

> hello,
> the current draw info for each module is in their
> website.
> here is the link:
> http://www.analoguesystems.co.uk/pdf/Appendix%2011.pdf
> 
> bakis.
> 
> 
> 
> 
> 
> --- alt-mode <yahoo@a...> wrote:
> 
> > Folks,
> > 
> > Does anyone know if it is possible to get a bigger
> > power supply for an older
> > RS15 Chassis?  Mine doesn't have enough power for my
> > modules.  [Remove a
> > largish module (e.g. RS-110) and it runs fine; put
> > it back and the chassis
> > will run for a bit but then it will generate a loud
> > low noise at the outputs
> > of some of the modules and the LEDs visibly change
> > state.]  
> > 
> > I've played around with different module
> > arrangements but without any
> > current draw information on the modules, this is a
> > guessing game!  Note: It
> > would be *really good* to have this information on
> > the web site like other
> > modular manufacturers do!
> > 
> > Any pointers are welcome.
> > 
> > 	Eric
> > 
> > 
> > 
> 
> 
> =====
> Bakis Siros
> Parallel Worlds / Polariton
> Athens-Greece
> [Doepfer_a100] group owner
> http://www.shimarecords.co.uk
> http://www.ward12.com
> 
> 
> 		
> __________________________________ 
> Do you Yahoo!? 
> The all-new My Yahoo! - Get yours free! 
> http://my.yahoo.com