Bc2000 (for the BCF2000 & BCR2000)

Hi, 
 
I just received a BCR2000 yesterday afternoon from Digital Village. 
Plugged it in, turned it on and installed the drivers from the 
Behringer website (Windows XP Pro), seemed to work fine. 
 
The power on version showed 1.03 so I decided to upgrade to the 
latest OS version before continuing. Using MidiOX I sent the 
bcr2000_1-04.syx file to the device as per instructions on the 
website. There were a couple of errors shown on the device's 
display, and it finished with the message "boot". I turned the 
BCR2000 off and then on, only to be greeted by "noOS" displayed and 
the STORE and LEARN buttons lit. The BCR2000 didn't respond 
to anything. 
 
The solution is to power on the device while holding down the STORE 
and LEARN buttons. The display should now read LOAD. You then need 
to plug a MIDI cable OUT from the PC, to IN on the BCR2000, and send 
the sysex upgrade to the BCR2000 through this. This worked for me 
and now I have a perfectly functioning BCR2000 again. 
 
I hope this helps someone!