Bc2000 (for the BCF2000 & BCR2000)

I have an edited mackie emulation sysex for the BCF which im using
with ableton live (there is no shift key so easier navigation) but ive
run in to a problem. 

When the original sysex was loaded it didnt give any led feedback,
except for the scene scroll & master volume (i didnt write it). So i
got the BCReditor from here & noticed that the scene scroll had a line
'.mode 12dot' whereas the others just had '.mode off'. I pasted this
in to all the encoders and the feedback worked. 

however, ive noticed that the LEDs are not in sync with the
value/position displayed in Live, no matter if it's a Pan, Send or
Rack Macro. Its like they are running at different resolutions or
something. 

I thought I would try changing the 12 to a 15 seeing as there is 15
leds on each ring but this killed all the feedback & gave an error
when loading in to the bcf. 

Can anybody help? Im so close to having it perfect after having added
encoder acceleration but its just this one last thing thats annoying.