Bc2000 (for the BCF2000 & BCR2000)

Great, thanks for the reply!

There wasn't a line for minmax so I added it but it didn't help. I
also had a look at the document you mentioned, and tried a few things
but still not working.

When they are set to pan the feedback should show the light in the
middle of the encoder as default right (12 o'clock)? Its not doing
this, it starts at the bottom left. I thought about setting the mode
for these to pan but then i imagine it wouldnt work correctly when the
encoders are set to sends. 

Here are a few lines from the sysex, is there anything that looks wrong? 

$rev F1
$preset
.name 'MCU All Mapped          '
.snapshot off
.request off
.egroups 4
.fkeys off
.lock on
.init
$encoder 1
.easypar CC 1 16 0 127 relative-3
.resolution 96 192 384 768
.showvalue off
.mode 12dot
$encoder 2
.easypar CC 1 17 0 127 relative-3
.resolution 96 192 384 768
.showvalue off
.mode 12dot