Bc2000 (for the BCF2000 & BCR2000)

You probably have to set your soft synth to change the patch or bank when it
receives the the NRPN/CC#/Whatever type of data number you have coming out
of your BCF or BCR when you press the button on the BCF or BCR that you want
to control the patch or bank change up or down or cycle button.

Download the BCedit software from the Behringer website's BCF/BCR product
page.  Use this to set one button to trigger the BCF to transmit one
particular NRPN or CC# to the computer.  Then, configure your soft synth to
change the patch to the next patch in the list of patches on your soft
synth.  After this last step is complete, the soft synth should change the
patch to the next patch when you press this button, as long as your soft
synth is receiving the messages being transmitted out of the BCF or BCR.

Read this carefully and try to work through it, if you get stumped post the
specifics of what you're stumped about, or call behringer tech support.


----- Original Message ----- 
From: "K2500X" <k2500x@...>
To: <bc2000@yahoogroups.com>
Sent: Saturday, March 04, 2006 2:33 PM
Subject: [bc2000] Patch and bank change?


> How do you send simple patch and bank change messages to your soft
> synths? v1.10 is supposed to support this feature now.
>
> Thanks,
> Ken
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.375 / Virus Database: 268.1.2/274 - Release Date: 3/3/2006
>
>