Patch and bank change?
2006-03-04 by K2500X
How do you send simple patch and bank change messages to your soft synths? v1.10 is supposed to support this feature now. Thanks, Ken
Thread
Patch and bank change?
Re: [bc2000] Patch and bank change?
2006-03-05 by Erik Bowen
You probably have to set your soft synth to change the patch or bank when it receives the the NRPN/CC#/Whatever type of data number you have coming out of your BCF or BCR when you press the button on the BCF or BCR that you want to control the patch or bank change up or down or cycle button. Download the BCedit software from the Behringer website's BCF/BCR product page. Use this to set one button to trigger the BCF to transmit one particular NRPN or CC# to the computer. Then, configure your soft synth to change the patch to the next patch in the list of patches on your soft synth. After this last step is complete, the soft synth should change the patch to the next patch when you press this button, as long as your soft synth is receiving the messages being transmitted out of the BCF or BCR. Read this carefully and try to work through it, if you get stumped post the specifics of what you're stumped about, or call behringer tech support. ----- Original Message -----
Show quoted textHide quoted text
From: "K2500X" <k2500x@...> To: <bc2000@yahoogroups.com> Sent: Saturday, March 04, 2006 2:33 PM Subject: [bc2000] Patch and bank change? > How do you send simple patch and bank change messages to your soft > synths? v1.10 is supposed to support this feature now. > > Thanks, > Ken > > > > > > > Yahoo! Groups Links > > > > > > > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.375 / Virus Database: 268.1.2/274 - Release Date: 3/3/2006 > >
Re: [bc2000] Patch and bank change?
2006-03-05 by Erik Bowen
Sorry, I left something out of that last explanation. Scratch that, and read this instead, it should make more sense: You probably have to set your soft synth to change the patch or bank when it receives the the NRPN/CC#/Whatever type of data number you have coming out of your BCF or BCR when you press the button on the BCF or BCR that you want to control the patch or bank change up or down or cycle button. Download the BCedit software from the Behringer website's BCF/BCR product page. Use this to set one button to trigger the BCF to transmit one particular NRPN or CC# to the computer. Then, configure your soft synth to change the patch to the next patch in the list of patches on your soft synth when the soft synth receives that particular NRPN or CC#. After this last step is complete, the soft synth should change the patch to the next patch when you press this button, as long as your soft synth is receiving the messages being transmitted out of the BCF or BCR. Read this carefully and try to work through it, if you get stumped post the specifics of what you're stumped about, or call behringer tech support. ----- Original Message ----- From: "Erik Bowen" <erik.bowen@...> To: <bc2000@yahoogroups.com> Sent: Sunday, March 05, 2006 6:09 AM Subject: Re: [bc2000] Patch and bank change? > You probably have to set your soft synth to change the patch or bank when it > receives the the NRPN/CC#/Whatever type of data number you have coming out > of your BCF or BCR when you press the button on the BCF or BCR that you want > to control the patch or bank change up or down or cycle button. > > Download the BCedit software from the Behringer website's BCF/BCR product > page. Use this to set one button to trigger the BCF to transmit one > particular NRPN or CC# to the computer. Then, configure your soft synth to > change the patch to the next patch in the list of patches on your soft > synth. After this last step is complete, the soft synth should change the > patch to the next patch when you press this button, as long as your soft > synth is receiving the messages being transmitted out of the BCF or BCR. > > Read this carefully and try to work through it, if you get stumped post the
Show quoted textHide quoted text
> specifics of what you're stumped about, or call behringer tech support. > > > ----- Original Message ----- > From: "K2500X" <k2500x@...> > To: <bc2000@yahoogroups.com> > Sent: Saturday, March 04, 2006 2:33 PM > Subject: [bc2000] Patch and bank change? > > > > How do you send simple patch and bank change messages to your soft > > synths? v1.10 is supposed to support this feature now. > > > > Thanks, > > Ken > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > -- > > No virus found in this incoming message. > > Checked by AVG Free Edition. > > Version: 7.1.375 / Virus Database: 268.1.2/274 - Release Date: 3/3/2006 > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.375 / Virus Database: 268.1.2/274 - Release Date: 3/3/2006 > >
Re: [bc2000] Patch and bank change?
2006-03-06 by Erik Bowen
OK, Final draft. Should make sense. You probably have to set your soft synth to change the patch or bank when it receives the the NRPN/CC#/Whatever type of data number you have coming out of your BCF or BCR when you press the button on the BCF or BCR that you want to control the patch or bank change up or down or cycle button. Download the BCedit software from the Behringer website's BCF/BCR product page. Use this to set one button on the BCF or BCR to trigger the BCF or BCR to transmit one particular NRPN or CC# to the computer. Then, configure your soft synth to change the patch to the next patch in the list of patches on your soft synth when the soft synth receives that particular NRPN or CC#. After this last step is complete, the soft synth should change the patch to the next patch when you press this button on the BCF or BCR, as long as your soft synth is receiving the messages that are being transmitted out of the BCF or BCR. Read this carefully and try to work through it, if you get stumped post the specifics of what you're stumped about, or call behringer tech support. ----- Original Message ----- From: "Erik Bowen" <erik.bowen@...> To: <bc2000@yahoogroups.com> Sent: Sunday, March 05, 2006 2:50 PM Subject: Re: [bc2000] Patch and bank change? > Sorry, I left something out of that last explanation. Scratch that, and > read this instead, it should make more sense: > > > You probably have to set your soft synth to change the patch or bank when it > receives the the NRPN/CC#/Whatever type of data number you have coming out > of your BCF or BCR when you press the button on the BCF or BCR that you want > to control the patch or bank change up or down or cycle button. > > Download the BCedit software from the Behringer website's BCF/BCR product > page. Use this to set one button to trigger the BCF to transmit one > particular NRPN or CC# to the computer. Then, configure your soft synth to > change the patch to the next patch in the list of patches on your soft > synth when the soft synth receives that particular NRPN or CC#. After this > last step is complete, the soft synth should change the > patch to the next patch when you press this button, as long as your soft > synth is receiving the messages being transmitted out of the BCF or BCR. > > Read this carefully and try to work through it, if you get stumped post the > specifics of what you're stumped about, or call behringer tech support. > > ----- Original Message ----- > From: "Erik Bowen" <erik.bowen@...> > To: <bc2000@yahoogroups.com> > Sent: Sunday, March 05, 2006 6:09 AM > Subject: Re: [bc2000] Patch and bank change? > > > > You probably have to set your soft synth to change the patch or bank when > it > > receives the the NRPN/CC#/Whatever type of data number you have coming out > > of your BCF or BCR when you press the button on the BCF or BCR that you > want > > to control the patch or bank change up or down or cycle button. > > > > Download the BCedit software from the Behringer website's BCF/BCR product > > page. Use this to set one button to trigger the BCF to transmit one > > particular NRPN or CC# to the computer. Then, configure your soft synth > to > > change the patch to the next patch in the list of patches on your soft > > synth. After this last step is complete, the soft synth should change the > > patch to the next patch when you press this button, as long as your soft > > synth is receiving the messages being transmitted out of the BCF or BCR. > > > > Read this carefully and try to work through it, if you get stumped post > the > > specifics of what you're stumped about, or call behringer tech support. > > > > > > ----- Original Message ----- > > From: "K2500X" <k2500x@...> > > To: <bc2000@yahoogroups.com> > > Sent: Saturday, March 04, 2006 2:33 PM > > Subject: [bc2000] Patch and bank change? > > > > > > > How do you send simple patch and bank change messages to your soft > > > synths? v1.10 is supposed to support this feature now. > > > > > > Thanks, > > > Ken > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > No virus found in this incoming message. > > > Checked by AVG Free Edition. > > > Version: 7.1.375 / Virus Database: 268.1.2/274 - Release Date: 3/3/2006
Show quoted textHide quoted text
> > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > -- > > No virus found in this incoming message. > > Checked by AVG Free Edition. > > Version: 7.1.375 / Virus Database: 268.1.2/274 - Release Date: 3/3/2006 > > > > > > > > > Yahoo! Groups Links > > > > > > > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.375 / Virus Database: 268.1.2/274 - Release Date: 3/3/2006 > >