Bc2000 (for the BCF2000 & BCR2000)

The Tx81z (or TQ5 in my case) sysex parameter format

$F0 sysex start
$43 Yamaha
$1n Sub status (TX81 types) where s = channel
$12 Voice or $13 additional voice parameters
value
$F7

If you have a look at the sysex in the preset, it is sending the 3rd
byte of $1A

Is your TX set up to be channel 10?

> Assuming that the TX81Z editor is valid, it should work just fine (the
> site I ripped them off from was from an artist that used it regularly,
> so if there's anything wrong, it's probably with my BCR2000.)
> 
> If the WT11 can take TX81Z patches, I don't foresee any problems. 
> I've got a YS200 keyboard that takes the same patches as the TX81Z,
> and though I still haven't gotten my BCR2000 to work properly in this
> respect, I've got a software patch editor which works fine on both the
> YS200 and the TX81Z.  Yamaha is pretty good about cross-integration
> with the different FM synths.  I just hope somebody gets the BCR2000
> to work for this function and that it is just my particular unit
> that's malfunctioning.  I don't mind buying another one, but
> otherwise, FM synthesis is going to have to take a permanent leave of
> absence from my studio because I'm not going to be using a computer in
> there anymore.
> 
> --- In bc2000@yahoogroups.com, Martin Klang <mars@> wrote:
> >
> > 
> > yes, sorry, the WT11!
> > It's the tone generator I got with my second-hand wx11 electronic
wind  
> > instrument, and it's a little beaut.
> > 
> > It can load voices straight from a DX11 or TX81Z, but the WT11 has  
> > extremely limited editing capabilities itself.
> > Hm, reading the manual it says it is possible to edit  a performance  
> > using an external MIDI device, e.g. DX11.
> > 
> > Now I just have to wire this up with 2 midi cables and a broken BCR  
> > usb connection...
> > Send preset, reconnect!
> > 
> > /m
> > 
> > On 29 Apr 2008, at 18:17, ivaasura wrote:
> > 
> > > --- In bc2000@yahoogroups.com, Martin Klang <mars@> wrote:
> > > Do you mean the DX11 or the WT11? The WX11 is a MIDI
saxophone... ;-)
> > > The DX11 should be compatible to the TX81Z, as it was it's keyboard
> > > version, but I do not know the WT11's sound architecture.
> > >
> > > Something different: In the early nineties I once tried to
program my
> > > Kawai MM-16 controller for my TX81Z, I found out that there were
some
> > > errors in the sysex documentation of the manual. They mischanged
some
> > > parameters for one operator with the parameters of another...
> > >
> > >
> > > ------------------------------------
> > >
> >
>