Bc2000 (for the BCF2000 & BCR2000)

Thanks for the reply.
Please take a look at the doc I uploaded.
Tell me if it is possible.
Then, if you can get me started a little, I will press on ahead.
Thank you,
Kip


--- In bc2000@yahoogroups.com, "rpcfender" <rpcfender@...> wrote:
>
> Hi
> 
> > Can these new tools enable real time sysex control over the old VFX I
> > have sitting in a box, because the programming interface stinks so
much.
> 
> As you have the sysex info you should be able to write a preset to
> control the VFX1.
> 
> Most synths allowed for individual parameters to be changed with a
> sysex message. Some, as we have discovered, only allowed for a
> complete preset to be sent by sysex.
> 
> I don't know the VFX, but if you're not too sure about sysex, scan the
> sysex info and put it in the files section.
> I have made a new folder "Sysex Data". Drop it in there and I'll have
> a look..
> 
> In fact I would be very cool for you to start a library of sysex info
>  for hardware.
> I'll drop in what I have and every one else, feel free to add to the
> files. 
>  
> > If I get pushed over the top, maybe I can make it work.
> > I have the manual with the sysex information.
> > Where do I start this process?
> 
> Go to the Wiki to get the basic info on how to program the BCR as well
> as info on the .tx command in BCSecrets in the Documentation section.
> http://bc2000.pingdynasty.com/ (this link is on the BC2000 home page
> )
> In the files section...
> You can grab Mark's editor if you don't like writing code or mine if
> you do.
> Grab a few of the other presets and have a look at. They are just text
> files.
> Use Mark's Midi Implementation to use as your reference.
> 
> Read some of the past messages. There have been quite a few folk, like
> you, starting from scratch that have written presets for hardware
synths.
> 
> I came here looking for the sysex info for the BCR - Behringer
> wouldn't release it. Together we managed to sort most of it out.
> 
> Finally, post any problems back here.
> 
> I hope this helps you get started.
> All the best
> 
> Royce
>