Bc2000 (for the BCF2000 & BCR2000)

Hey...
I have the vanilla VFX no sd or sdII.
I have the midi base chans set to 1 no 0 option.
Alright, Royce, I will play around with midiquest to see if i can get
ANY realtime control over a patch edit.  
If I do, then I will come back with more.
I am feeling very pessimistic at this point.  
I remember how often I got a crash out of midiquest and the vfx in the
past.
I will try some more, sigh!

Thanks for your time.
Maybe it's time for this thing to get the boot! 
The vfx that is...

Kip 

--- In bc2000@yahoogroups.com, "rpcfender" <rpcfender@...> wrote:
>
> 
> > First .tx string no result, will reinitialize after a little while of
> > turning the knob.
> 
> dash it all !
> 
> > Second .tx string causes sysex err and keyboard reinitialize
> immediately.
> So we are both wrong
> 
> > Judging by the midiquest dump i posted in the sysex section, from
> > midiquest, filter cutoff #1 has a 13 where yours has a twelve.
> 
> I noticed that too but
> pp 12 -
> Page 12 Filter #1
> Page 13 Filter #2
> Both the Page and Slot start at 0 so there isn't that sort of problem.
> I have had to make quite a few "adjustments" to MidiQuest over the years
> to get it to work.
> 
> Have you checked  that the VFX  is set to channel 1 (or 0 if they work
> that way) for the global Midi channel or Sysex Global channel or
> whatever it is called?
> 
> > I tired to do this with the second .tx string. Which btw matches the
> > dump from midiquest, however, crash.
> 
> >
> > Hmmmm... my sysex knowledge is not so good, yet.
> We all seem to be learning.
> 
> Can you get the VFX to output parameter sysex?
> 
> I see that there is a VFX - SD and a VFX-SD II in MidiQuest. What model
> is yours?
> 
> Can you get your Editor to work on any parameter on the VFX?
> (what is it and what is the sysex string in MidiOx?)
> If you can, try to modify the .tx line and see if you can control the
> VFX from the BCR.
> 
> Royce
>