Bc2000 (for the BCF2000 & BCR2000)

I would like to thank you both for your replies. It seems that what I
ask is not that easy. 

I am also not aware of any sysex that can change simultaneously
the midi channel of all knobs and buttons. Maybe I have to look deeper
in the manual. 

The reason for asking this is that I find it a wasting of presets (and
time) to create one preset for each of Blofeld's 16 timbres. 

Also would like to add that I am half way to the preset for controling
WALDORF BLOFELD, I have added the 3 oscilators, AMP and Filter
envelop, NOISE generator and AM. What remains to be done are the 2
filters and some knobs for the effects- lfos. 

I will upload the preset here when I finish it. 

  


--- In bc2000@yahoogroups.com, "poser_p" <poserp@...> wrote:
>
> I don't know off-hand the sysex you'd send to the BCR to change the
> midi channel it transmits on, but you can set up a loopback via midiox
> and thus the BCR can retransmit to itself. Some midi patchbays allow
> for this as well. You have to be careful how you set it up to avoid
> MIDI loops, but I've gotten it to work quite well. In my case, I store
> "presets" for synth models I'm programming on a K2000RS. When I hit a
> button to recall a preset, the sysex data is sent simultaneously to
> the K2000RS and the BCR, causing the LEDs on the BCR indicating knob
> position/button state to update as well. I'm pretty sure you could set
> up something similar so that when you turn a knob, the transmit
> channel also changes.
> 
>     -Andrew-
> 
> > > Each BCR knob is assigned to a specific MIDI Channel. Useful but my
> > Blofeld is 16 part 
> > > multitimbral. Is there a way to assign MIDI channel to one knob?
> > This way I will twist the 
> > > knob change the midi channel for all other knobs. So in short is it
> > possible to control the 
> > > midi channel of all knobs from 1 knob ?
>