Bc2000 (for the BCF2000 & BCR2000)

Ouch... sorry, you are not sending a .tx are you!
Sorry.
Just an nrpn.
I asked because I was doing something with nrpn, but I was having a
knob do different things based on direction of turn, therefore I
needed to do it in a .tx statment.
Never mind.
Kip
--- In bc2000@yahoogroups.com, "k5kip_1999" <k5kip_1999@...> wrote:
>
> Try some really low resolutions like 10, or 20...
> so maybe something like ...
> 10, 24, 48, 96
> So when you spin fast you get that stepping, which might be
> interesting, but when you go slow you don't get it.
> Kip
> --- In bc2000@yahoogroups.com, "hubert_langlois" <hubert_langlois@>
> wrote:
> >
> > Hi,
> > 
> > I've made a template for my Alesis Micron with the original Behringer
> > (crap) editor. This worked. Next I've adapted this template in
> > BCRManager and experimented a bit with the resolution controls. Since
> > then I've encountered some problems with the resolution i.e. the bcr
> > tends to skip values which translates in hearable stepping. This also
> > happens with parameters I only changed the name, nothing else. Even
> > lower resolutions (e.g. 96), lower then previous settings are giving
> > this problem. I did check the documentation and experimented with
> > ifferent values. Someone knows a way to solve this? The format for the
> > Micron is 14-bit NRPN. 
> > 
> > Thanks,
> > Hubert
> >
>