Bc2000 (for the BCF2000 & BCR2000)

Hi Hubert
> It might help if you post your .tx also.

Are you using an editor?
Normally it is better if you can post some of the script that isn't
working 

> > I've made a template for my Alesis Micron with the original Behringer
> > (crap) editor. This worked. Next I've adapted this template in
> > BCRManager and experimented a bit with the resolution controls. Since
> > then I've encountered some problems with the resolution i.e. the bcr
> > tends to skip values which translates in hearable stepping. This also
> > happens with parameters I only changed the name, nothing else. Even
> > lower resolutions (e.g. 96), lower then previous settings are giving
> > this problem. I did check the documentation and experimented with
> > ifferent values. Someone knows a way to solve this? The format for the
> > Micron is 14-bit NRPN. 

You might like to try resolutions that are related to the default 96
ie 96 / 2 = 48
The encoders appear to have a physical resolution of 96.
This is 3.75 degrees between values which can be a bit hard to control.

If you are editing using the script try
.resolution 48 ; which is the same as .resolution 48 48 48 48

Setting it at 48 means you have to turn twice as far to get to the
next value (7.5 degrees). You could try 24 or 12 or 6 etc

Let me know how you get on.
There are quite a few posts on this subject that you might like to
look through.

All the best

Royce