Bc2000 (for the BCF2000 & BCR2000) group photo

Yahoo Groups archive

Bc2000 (for the BCF2000 & BCR2000)

Index last updated: 2026-04-28 23:16 UTC

Message

Re: [bc2000] Re: BCF output device only

2008-07-30 by Karl Lurman

Sorry, I had you all confused. I assumed you were talking about visual
output, not midi device output...

Karl

On Wed, Jul 30, 2008 at 6:35 AM, schivins <babylon05@...> wrote:
> I got it working. I kept playing with it and it now shows up under the
> MIDI list.
>
> Thanks for the help.
>
> --- In bc2000@yahoogroups.com, "Mark van den Berg" <markwinvdb@...> wrote:
>>
>> --- In bc2000@yahoogroups.com, "schivins" <babylon05@> wrote:
>> > Weird thing is I also tried Behringer's own USB driver (vs. 1.2.1.3)
>> > . Instead for USB Audio the device manager listed BCF.. However when
>> > this was listed nothing worked at all. IS this listed in your device
>> > manager as BFC...(I cannot remember exactly) and it is working for
> you?
>>
>> The Behringer USB driver vs. 1.2.1.3 ends up in Device Manager as
>> "B-Control Midi (10/19/2005,1.2.1.3)" under "USB Composite Device".
>> Works perfectly in my case.
>>
>> One thing: if you go to the USB driver's "Properties" -> "Properties"
>> -> "MIDI Devices and Instruments" -> "Behringer MIDI Device" and click
>> the "Properties" button, "Use MIDI features on this device" should be
>> selected, otherwise things won't work. (I can't imagine that this is
>> the problem, since this setting is the default, but you might check it
>> just to be sure.)
>>
>> By the way, I would recommend you try fixing your USB driver problem
>> in normal BCF mode, not in some emulation mode, because in an
>> emulation mode USB/MIDI connectivity is harder to test - once
>> bidirectionality does work in normal BCF mode, you can try emulation
> mode.
>>
>> If you're very unlucky, you might have one of those BCFs/BCRs with a
>> defective USB controller - several people have reported this in our
>> group over the last year or so. E.g. my own BCR habitually stopped
>> sending data to the computer (ultimately I had it replaced at the
>> shop), and Royce has reported a horror story concerning a string of
>> BCFs that (if I remember correctly) didn't receive data from the
> computer.
>>
>> > This is just weird. I sent Behringer a support email, maybe they can
>> help.
>>
>> I'm sure they CAN, the question is whether they WILL!
>>
>> Good luck!
>> Mark.
>>
>
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.