Bc2000 (for the BCF2000 & BCR2000)

Once again thanks for all the help...!

I have yet another question.Is it possible to have the BCR's not snap 
to the last adjusted settings on preset change? I am wanting the BCR 
to only respond to feedback triggered from my computer when changing 
presets and I am finding that sometimes the BCR's stored values are 
superceding.
I have a funny feeling the answer to this one is no..


--- In bc2000@yahoogroups.com, "rpcfender" <rpcfender@...> wrote:
>
> Hi
> > Sorry to flood the messageboard...
> Not a problem
> 
> > I am hoping to be able to switch presets on one of my Behringers 
> > romotely when I switch presets on the other in order to have them 
> > operate like a single device. Is this possible? Can the BC's 
respond 
> > to a remote preset change command?
> 
> This is a Master and slave relationship. 
> You will change the preset only on the Master or you will be out of 
sync.
> You will need to setup the Presets on the Master and the Global
> channel on the slave.
> 
> (on the Master)
> You need to add an extra line in the Preset LEARN message in the
> Master BC (as you did before) - Preset change which is Midi message
> $C0 + channel
> 
> eg for preset 10 and using channel 15 as the channel only being 
being
> used to sync the BCs.
> $CE 9
> 
> Don't forget Channel starts at 0 and Presets start at 0 so Preset 10
> is sent as 9
> 
> You will need to add the Midi Preset message to the LEARN message 
for
> each of the 32 BC presets to keep in sync.  A bit tedious I'm 
afraid,
> but it does allow for great flexibility in what you can select. 
> 
> (on the slave)
> You will need to set the global Midi Receive Channel on the slave 
BC .
> 
> BC Manager - "B-Controls Dialog" The menu button that looks like a
> globe for the Global settings - Receive Channel - would be set to 
15,
> in this example, on the slave unit.
> 
> Royce
>