Bc2000 (for the BCF2000 & BCR2000)

--- In bc2000@yahoogroups.com, "Mark van den Berg" <markwinvdb@...> 
wrote:
>
> --- In bc2000@yahoogroups.com, "djeinstin" <djeinstin@> wrote:
> > I purchased the BCR2000 about 6 months ago. It worked fine with 
> > controlling ableton live and fruityloops. But now everytime i 
connect 
> > to use it on the programs it works for 1 min than it stops 
controlling  
> > my learned controls please help... i reinstalled all the possible 
> > drivers and even flashed the bcr to the latest firmware upgrade.
> 
> Are you using a USB connection/operation mode ("U-1" etc.), and does
> the BCR stop sending ANY MIDI data via USB to the computer after a
> minute or so? If the answer to both questions is yes, the USB
> controller on the BCR itself may be faulty, in which case you need 
to
> contact your dealer and get a replacement BCR. Several people in 
this
> group (including me!) have had this problem - see the message 
archive
> of this group for further discussion.
> 
> On the other hand, it might be something else entirely. To exclude 
the
> USB controller problem mentioned above, you might try using a MIDI
> connection/operation mode ("S-1" etc.): if the problem then 
persists,
> you at least know it was NOT the USB controller.
> 
> Hope this helps a bit,
> Mark.

----------------------------------------------------------------------
----------------------------------------------------------------------

DAME IT WHY! :(
it was working beautifully but what can cause this ..?

Thanks a lot for your replay ...