Bc2000 (for the BCF2000 & BCR2000)

So your routing is bcf > to DAW software?
Mackie Control surface input


Mago's is designed for Live... Some of the commands set will need to
change.
Most of it will work.
I don't know if eq works, I don't have cube, except for a very old
version... and it is not installed.



--- In bc2000@yahoogroups.com, "nedaggg" <nedagg@...> wrote:
>
> Hi kip_1999
> 
> Virtual lcd - I tried and it crashes more and more and then decided
not to use , no ok
> 
> Routing - usb , do you think if I route via midi on my m-audio fast
track could solve the problem ?
> 
>  I tried other preset from file section (preset "bcfmce") and it
worked , because its not mackie but GM so I don't get many controls
like inserts neither eq .  (Magos couldn't be downloaded I will try
again) . Does magos provide control over eq ? 
> 
> But most important I took the bcf to a friends house where I tested
in MCE  with cubase 4 and vista and wow it worked really nice !!! So
it is something with my setup maybe asio 4all  , I will try reinstall
cubase and drivers again 
> 
> Any comments are welcome
> 
> Denis
>  
> --- In bc2000@yahoogroups.com, "k5kip_1999" <k5kip_1999@> wrote:
> >
> > Are you using a virtual lcd?
> > How are you routing your midi from bcf?
> > Have you tried the other bcf preset for Live, here in the filse
> > section?  I think it is Mago's.
> > I know you are not using Live, however, many, not all, of them mackie
> > commands are the same across daws. It might help to eliminate some
> > variables.
> > Kip
> > 
> > 
> > 
> > --- In bc2000@yahoogroups.com, "nedaggg" <nedagg@> wrote:
> > >
> > > Hello 
> > > 
> > > Anybody using bcf with cubase sx3.1. ???   Any advices are
welcome !!!
> > > 
> > > --- In bc2000@yahoogroups.com, "nedaggg" <nedagg@> wrote:
> > > >
> > > > Hello. When I use my bcf2000 in mackie mode on Cubase sx 3.1 
> > there's lot of delay/latency . If I move a fader , it returns to
> > positions and after some tweaking of knobs and mainly press function
> > keys  the bcf almost do not respond anymore . Wbbhen I use in BC mode
> > instead everything goes fine , faders follows automation in real time
> > .I noticed that another generic remote Preset from behringer (simple
> > mixer )used in bc mode caused about the same  delay  I'm using Vista ,
> > firmware 1.10, Core duo , 1 Gb memory.  Any check-list suggested to
> > solve this problem ? It seems to be any config issue . Thank you.
Denis
> > > >
> > >
> >
>