Bc2000 (for the BCF2000 & BCR2000)

--- In bc2000@yahoogroups.com, "b21manatarms" <b21manatarms@...> wrote:
> Hi all, hope you can help me out. I've been struggling with this all
day.
> 
> I've tried dumping several presets to my BCR, using both BC Manager
> and Sysex Loader. I'm using the latest published drivers and firmware.
> 
> Everything I transfer appears to go smoothly but when I turn the
> encoders they all have a minimum of 0 and a maximum of 1. I've
> experimented with changing the default value in the scripts. This
> seems to work but turning the associated encoder will only change its
> value by 1 or 2.
> 
> Any suggestions?

Are you by any chance sending MEMORY presets to the BCR? Basically the
problem with that is that the BCR's actual behavior is determined by
the "TEMPORARY" preset ("preset 0" in BC Manager).

There have been several message threads about this in the BC2000 Yahoo
group lately; in particular you may look at my message "Re: BC Manager
midi channel issue" of Jan 1, 2009 and two messages called "Re:
Getting strated: saving edited preset" of Jan 8, 2009.

Let me know if this doesn't fix your problem.

> Do I need to have my BCR in a certain initial state
> before I send anything to it?

No. Except that the BCR must not be in Global Setup edit mode ("EG" on
the display), or editing a button/encoder - but in all these cases BC
Manager warns you that things aren't working when you're sending a
preset to the BCR.

Mark.