Bc2000 (for the BCF2000 & BCR2000)

I found that I could not load the latest firmware from the USB 
connection. I had to do it via MIDI.

--- In bc2000@yahoogroups.com, "yanayayafr" <mailing_list@d...> 
wrote:
> Hi, 
>  
> I just received a BCR2000 yesterday afternoon from Digital 
Village. 
> Plugged it in, turned it on and installed the drivers from the 
> Behringer website (Windows XP Pro), seemed to work fine. 
>  
> The power on version showed 1.03 so I decided to upgrade to the 
> latest OS version before continuing. Using MidiOX I sent the 
> bcr2000_1-04.syx file to the device as per instructions on the 
> website. There were a couple of errors shown on the device's 
> display, and it finished with the message "boot". I turned the 
> BCR2000 off and then on, only to be greeted by "noOS" displayed 
and 
> the STORE and LEARN buttons lit. The BCR2000 didn't respond 
> to anything. 
>  
> The solution is to power on the device while holding down the 
STORE 
> and LEARN buttons. The display should now read LOAD. You then need 
> to plug a MIDI cable OUT from the PC, to IN on the BCR2000, and 
send 
> the sysex upgrade to the BCR2000 through this. This worked for me 
> and now I have a perfectly functioning BCR2000 again. 
>  
> I hope this helps someone!