Bc2000 (for the BCF2000 & BCR2000)

--- In bc2000@yahoogroups.com, "bernard.escaillas" <escaillas@...> wrote:
> --- In bc2000@yahoogroups.com, "Mark van den Berg" <markwinvdb@>
> > I won't bore you with the details.
> 
> Do ! I am really interrested in these details !

Hm, I can see another MIDI implementation document on the horizon...
but hopefully a much smaller and simpler one than the one I wrote for
the BCF/BCR!

As to my specific remark about the strangeness of the blocks of the 99
memory presets: if I'm not mistaken, the two address bytes are
inserted IN THE MIDDLE of the "normal" data structure for the
button/encoder, and I think a single bit of the last byte of the
"normal" data structure is "pinched" to provide additional addressing.

And the addresses themselves don't say 0 for preset 0 and 1 for preset
1 etc., but start at some idiotic number (so these addresses probably
indicate the actual internal memory address at which the presets are
stored).

I warned you it would be boring...
 
> I have a Nano also. If you want, I might do this little exploration by 
> changing values on the BCN and sending patches to MixiOx sysex window.
> I can then try to create some Bitmapping document from that experiment.
>

Thanks for the offer! - but if the deal with ivaasura works out, I
won't have to bother you.

Mark.