Bc2000 (for the BCF2000 & BCR2000)

--- In bc2000@yahoogroups.com, "Mark van den Berg" <markwinvdb@...> wrote:
>
> --- In bc2000@yahoogroups.com, "johntremble72" <johntremble72@> wrote:
> > I dare say this has been answered before, but can't seee it.When I
> > look at preset/buttons and choose edit/standard output tab, if it is
> > "note" that is selected (under type) the mode box (select toggle
> > on/off)covers the knobs so that I can't see the values or change
> > them. I expect it will be to do with my screen settings (1024x768
> > 32bpp). Any workaround/advice?
> 
> Which version of BC Manager are you using?
> After similar complaints about version 1.5.1 from someone who used an alternative DPI (i.e. "magnification") setting, I spent about 2 full weeks improving things, so as far as I know, version 2.0.0 should work correctly in this respect.
> 
> You only mention your screen's size and bit depth - I can't see how either could be responsible for your problem.
> 
> In any case, as a workaround, you should still be able to "tab"/"shift tab" to any control.
> 
> Mark.


>Thanks for the speedy reply,I am using V2. you are right it is the DPI setting that is the culprit. I have mine set at 120 (125% normal),had to put it back to 96 and it works OK. And thanks for a great utility.