Bc2000 (for the BCF2000 & BCR2000)

Hi
What mode are you trying to operate it in?

Try pressing and holding the top left button while powering the machine on. This should put it into BC (non-emulation) mode.

Now it is in this mode, load up Mark's editor and have a look at the global settings and the presets.

OR if you are still in trouble try the panic reset - Push & hold EDIT press EXIT.

Let me know what happens

Royce

> 
> My unit seems to lock up when I power it on. It's OS v1.10 blinks in the LCD screen, and the unit is in-operable. If I push store/exit, I can initialize it and the unit works, and can be programmed. But if I change programs or power it off, the unit goes back to it's flashing status, and I have to start from initalize again.
> 
> Is there a battery in this thing that's causing this?
> 
> I re-installed 1.07 using update utility via mids/sys. Same problem.
> I installed v1.10 and the same problem happened. Both times the sys-ex dump was successful.
> 
> Any thoughts? I'm screwed right now, any help is much appreciated.
> 
> Thanks,
> 
> Dallapicolla
>