I also recommend you join the Waldorf Yahoo group.
Lots of XT experts are there.
Hi Christian
Here is a link to the sysex spec
http://www.waldorfmusic.de/en/archive?relPath=microwave/docs
From a quick glance at the sysex it looks like you need to have revision 2 of the OS in your Microwave to be able to access the parameters (but I could be wrong)
Download the sysex spec and see what parameters can be edited by CC or sysex.
Plan out the layout you want on BC.
Use Mark's editor and type the sysex string into the 'Learn' section for the encoder/button.
If you get into trouble come back and chat.
> But the Microwave doesn't send Data if u change parameter
> at the front panel. U can see it at the LED of the BCR2000.
> No signal.
> If u program one encoder manual with CC Data and send it to
> the Microwave... nothing happend.
> Midi Chanel an Connections are OK, I am no newbie in connecting.
> But if u change from CC Data to Pitch bend or Program Change the
> Microwave Midi LED lits and it will be done. Only CC Data is
> being ignored.
Are you saying that when you try to send sysex the Midi Led doesn't light?
If so it is likely that the sysex isn't programmed properly into the BC
Check with MidiOx to see what is coming out of the BC
All the best
Royce