Bc2000 (for the BCF2000 & BCR2000)

Hi Royce,

Thanks for this information, i have been a bit busy lately. I will see what ik 
can do.
Where can i find the Files/preset of the group?

Best

Robin




________________________________
From: Royce <rpcfender@yahoo.com.au>
To: bc2000@yahoogroups.com
Sent: Wed, August 25, 2010 4:38:55 AM
Subject: [bc2000] Re: Tweaking on a BCR/BCF?

  
Re: Tweaking on a BCR/BCF?

I have created a simple CC on channel 1 preset for the BCR.
It is in the Files/Preset section of the group.

If you are using Mark's editor it will load either file.
If not you can send the sysex to the BCR2000

Encoder 1 to 56 (4 banks in the top row) are CC 20 to 75 with a range of 0 to
127
Button 1 to 48 (4 banks of encoder switches and 2 button banks below) are CC 76
to 123

> Oh ofcourse i forgat, i am using Sonar 8 Producer.

Using Sonar ACT - take a deep breath, I hate ACT.

Enable the BCR Midi In and out
Options/Controllers/Surfaces
Add 'ACT Midi controller'
Select the In and out ports to the BCR
Check the ACT and WAI (Where am I) boxes for the BCR
Close
Tools should now have an option 'ACT MIDI Controller' select it
Drop down the Presets box and select Behringer BCR2000 (Custom)

Decide what rows of encoders you want to use - let's use the 3 banks of non
switched lower encoders to match the ACT layout
Click on the 'Enc 41' and you can change the Label if you want to.
Click on the area below the label and it will say 'midi learn'.
Twist the BCR Encoder (top left) and Sonar will store and respond to the data
coming in (it should read 0% to 100%)

It can sometimes take a second or two to make this register.

Once you have finished save the ACT preset
Keep this dialog open

Now to connect the ACT BCR to Massive
Insert a synth track of Massive

Click the Massive dialog to make sure it is the active window.
The ACT Controller dialog should change showing the attached Massive parameters.
Click on the ACT button in the Massive dialog (top right)
Move a Massive control then twist a BCR encoder to link the two.
Repeat this for all the other controls you want to link
Click on the ACT button again and it should bring up a messages box about x
Parameters and x Controls etc. Press Yes

They are now linked. When you exit Sonar the linking file is saved

All the best

Royce