Bc2000 (for the BCF2000 & BCR2000)

Thank You,

I solved it, I confused the on and off values, it should be highest on 'on' and 0 on 'off' and then I set the step value to match the up value dividable by three, works fine now.
I was making a template for the Minimonsta which maps Legato/Mono/Poly to the same control. Thanks for the reply though!

--- In bc2000@yahoogroups.com, "Royce" <rpcfender@...> wrote:
>
> Hi 
> you will have to tell us the values you want to send.
> if it is something random like 2, 24 and 17 then you are out of luck, but if it is a sequence 0,1,2 or 3,7,11 you could be ok.
> 
> Show the whole message
> 
> Mono    CC15 3
> Legato  CC15 1
> Poly    CC15 5
> 
> Legato is usually independent to mono/poly.
> You can have Mono/Poly and Multi - the EMU Preteus 2k etc
> 
> It looks like you are on the right track.
> 
> All the best
> Royce
> 
> --- In bc2000@yahoogroups.com, "sweetbreeder" <sweetbreeder@> wrote:
> >
> > I just got a BCR2000 and I'm making templates for some softsynths I have. I'm trying to set up some of the buttons to have a 'toggle' function for more values than 2, instead of on/off switch. For example changing mono/poly/legato modes. I tried setting upp CC value with 'increments' in Controller Mode and 'Steps: 3' in Controller Option, but that didn´t seem to work so well. How would I do this? Is it possible?
> >
>