Bc2000 (for the BCF2000 & BCR2000)

--- In bc2000@yahoogroups.com, "michel" <spammethehardest@...> wrote:
> I have done this many times but recently my BCR2000 doesnt let me change mode. Maybe this happens and I'm forgetting to do something so hopefully someone can help.
> 
> 1. Enter EG mode, see "EG" on LED - works ok
> 2. moving rotary and see the "U-x", "S-x" modes - works ok
> 3. trying to exit after making a change, press Exit button - nothing happens!! stays in EG mode forever
> 
> I've tried reflashing this and changing cables around.
> 
> Is there a weird parameter that I should check or maybe the button simply is broken?

The latter explanation seems more likely.

To test this, you may try to get the EXIT button to respond in other situations:

For instance, while switching the BCR on (via the POWER button at the back), hold STORE and EXIT. The display should briefly show "Init" (immediately after "1.10", but before e.g. "P- 1").

Or: with the display showing e.g. "P- 1", hold EDIT, then press EXIT: the display should show "PAnC".

(For more information on the above "commands", see sections 22 and 23 of "BC MIDI Implementation.pdf", available via http://home.kpn.nl/f2hmjvandenberg281/ .)

For a thorough examination of all your buttons and encoders, you can run BC Manager's "Maintenance -> Test hardware" routine. (See BC Manager manual, pp 34-35.)

Hope this helps,
Mark.