Bc2000 (for the BCF2000 & BCR2000)

> Is there any way to set BCR buttons to be lit by default and blink off while pressed?
>

Strangely there is only one way I know that you can have the default as ON. That is, with the LED on

You need to have the switch in Toggle mode (toggleon) and use easypar with the default = any value in the lower half of the min max range
eg minmax 0 100  then default has to be 49 or less

Unfortunately you need to have the switch in Momentary mode (toggleoff). So, as far as I know, having the LED on is not possible.

Perhaps Mark can show me that I am wrong here.


Royce