Bc2000 (for the BCF2000 & BCR2000)

--- In bc2000@yahoogroups.com, "Royce" <rpcfender@...> wrote:
>
> > Is there any way to set BCR buttons to be lit by default and blink off while pressed?
> >
> 
> Strangely there is only one way I know that you can have the default as ON. That is, with the LED on
> 
> You need to have the switch in Toggle mode (toggleon) and use easypar with the default = any value in the lower half of the min max range
> eg minmax 0 100  then default has to be 49 or less
> 
> Unfortunately you need to have the switch in Momentary mode (toggleoff). So, as far as I know, having the LED on is not possible.
> 
> Perhaps Mark can show me that I am wrong here.

Nope, I can't, I think you're spot on!

The first table in section 15.9 of "BC MIDI Implementation.pdf" is completely in line with your analysis, once we realize that the LED on the button basically acts in sync with the "on" and "oFF" messages flashing in the display (as described in the table). And this goes for both "standard" (.easypar) and "custom" (.tx) definitions.

So no, I can't see a way either.

Mark.