Bc2000 (for the BCF2000 & BCR2000)

--- In bc2000@yahoogroups.com, "dsimag" <dsimag@...> wrote:
> And then, don't ask why, I tried to plug BCR's USB cable into different port. And it worked! Looking at motherboard's documentation I found source of my problems - it's USB3! When I plugged it into USB2, it worked without a glitch! Just for the reference, motherboard is Gigabyte 890GPA-UD3H.
> 
> So, as an advice or hint to everybody in this group - if you're having problems with 64-bit USB driver for BCR2000, make sure you use USB2 port!

Well, in any case you can be glad that your BCR's USB controller isn't defective!

Actually the BCF and BCR don't even require USB 2: USB 1.1 suffices.

But your suggestion that Behringer's 64-bit BCn2000 driver is incompatible with USB 3 is pretty shocking.
I have no way to verify this hypothesis, but it sounds possible.

If other people experience the same problem with USB 3, maybe someone should contact Behringer: if confirmed, this problem is of course totally unacceptable.

Has anyone else tried to use a BCF/BCR in a USB 3 port (under either a 32-bit or 64-bit Windows OS)?

Mark.