Bc2000 (for the BCF2000 & BCR2000)

Hi, thanks for the response but the device is not being picked up via USB at all by my PC so this is not a possible solution.  Whilst it's displaying 'noOS' so I was told a sysex file would need to be dumped through a midi cable.

--- In bc2000@yahoogroups.com, karel skakal <s_y_nagual@...> wrote:
>
> If you use USB cable, you don't usually use other midi cable to PC, to other units yes.Then activate the USB-1 mode on BC, (it is in the manual )
> --- On Thu, 13/1/11, Sam <sam.korn@...> wrote:
> 
> From: Sam <sam.korn@...>
> Subject: [bc2000] noOS problem (know the fix, but not working for me!)
> To: bc2000@yahoogroups.com
> Date: Thursday, 13 January, 2011, 11:09
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
>  
> Â 
> 
> 
> 
>   
> 
> 
>     
>       
>       
>       Hi guys, got the 'noOS' problem and have connected my unit to my computer via USB to MIDI connected, installed midiox and got the relevant firmware I want to install to the device.  I have connected the midi 'out' from the PC to the 'in' on the BCF and vice versa.  When opening midiox it has no recognized outputs, therefore leaving me unable to dump the sysex.  The only other device connected (by usb not midi) to the computer is my evolution keyboard.  Please help, I am getting really annoyed with controlling programs with the mouse and hit a brick wall.  Any help is appreciated!!!
>