Bc2000 (for the BCF2000 & BCR2000)

hi mark and thanks for taking the time to offer some suggestions, apols in no immediate reply as a busy week with work and life.
most of ur tips i already was aware of
i always power on before launching reason
all bcr's are set to preset 1
ive tried both options of setting them to u1.u2,u3,u4 in sequence or all on u-1
they are all connected via a usb hub
this has all been done with an empty rack so none of them are pre assigned by reason to any temporary presets
i have tried the switch contoller off and back on in the reason presets, no change
again they are all recognised but on start up only 3 light up led's and when reason launches its worse
 
do u think  there is anyway to blank the behringer reason preset maps as they seem to be creating more problems than help ?
 
any further ideas appreciated :)
cheers again graham


--- In bc2000@yahoogroups.com, "Mark" <markwinvdb@...> wrote:
>
> --- In bc2000@yahoogroups.com, "bleepfunk" <bleepfunk@> wrote:
> > im running 4 bcr2000's with reason 5 . . .any one had this problem ?
> > 
> > (just had to re set up my 4 bcr's with reason a pc due to a macbookpro 
> > in the doctors....)
> > 
> > reason recognises all 4 (i have been able to map most buttons and 
> > encoders), but when it powers up only 1 has the the 16 buttons lit up .3 
> > have no led's on the bottom 3 rows of encoders
> > 
> > oddly when u power them up when reason is off, 3 light up all the led's
> 
> There's nothing odd about this: what you see in this case is whatever is in the actual default memory preset on the BCR (as indicated by "P-.." in the display).
> 
> You should always power up the BCRs BEFORE starting Reason, particularly if the BCRs are in "U-1/2/3/4" (USB) operating mode. (Preferably U-1; if you're using "standard" MIDI, use S-4.)
> When you start up Reason, any BCRs already defined via Edit -> Preferences -> 'Keyboards and Control Surfaces' (and with 'Use with Reason' checked) should start flashing their displays for a while: this flashing means that Reason is configuring the BCR's TEMPORARY preset (which has nothing to do with the content of the currently selected memory preset on the BCR, as indicated by "P-.." in the display).
> Just to make sure about the connections, try unchecking, then rechecking 'Use with Reason' for each BCR: again the BCR's display should flash for a while.
> Once all 4 BCRs respond in this way, you're in business: you can then "lock" any BCR to any Reason device via each Reason device's local menu (accessed by clicking the right mouse button).
> 
> For more info on how Reason works with the BCR, read section 18 of BC Manager Manual (available from http://home.kpn.nl/f2hmjvandenberg281/ ).
> By the way: BC Manager itself allows you to view Reason's default mappings for its devices - in your case this might be very useful.
> 
> > also only one has the push button encoders in multi function....
> 
> This depends on the specific Reason device the BCR is locked to: some Reason devices use multiple 'encoder groups', others don't.
> 
> Hope this helps,
> Mark.
>