Bc2000 (for the BCF2000 & BCR2000)

Someone please correct me if I'm wrong but From what I remember there are two tabs on each side which need to be pushed towards the centre of the unit to get it to pop off.



On 2011-02-03, at 6:17 PM, "shellfritsch" <shellfritsch@...> wrote:

> hello
> 
> i just picked up a used bcr2000 for real cheap. looks like it was dropped, as three of the encoders are missing the knobs & shafts. i tested the encoders out with a small tool & they still work great- in fact the whole unit functions just fine. i tried gluing in some replacement shafts to attach knobs to, but one of the broken encoders is in the top row & thus a "push" encoder. my attempts so far to make a proper shaft that still has a "push" to it have been unsuccessful.
> at this point i'm thinking it would be better to just replace the encoders.
> has anyone here been through this process? part numbers?
> also, any tips on disassembling the unit? i removed the screws from the side panels, but they seem stuck to something, don't want to force it...
> 
> thanks!
> -sean
> 
>