Bc2000 (for the BCF2000 & BCR2000)

Hi Bill
Thanks for your reply - It looks like it should be useable so I will go ahead and purchase. Might be an hour of fun with the manual to get it going but it will be worth it.
Regards
Tony

--- In bc2000@yahoogroups.com, "Bill Denton" <bdenton@...> wrote:
>
> It should work fine in HUI mode. I don't have the manual handy, but IIRC
> changing modes simply requires holding down a couple of keys while you turn
> the power on, and it will retain that mode until you change it.
>  
> There is some good documentation at www.behringer.com, including some
> templates you can cut out and put over the keys on the BCF 2000. I think
> there is something like a "presets addendum" that explains the whole
> process.
>  
> Good luck!
>  
> Bill Denton
>  
>  
> From: bc2000@yahoogroups.com [mailto:bc2000@yahoogroups.com] On Behalf Of
> Tony Millyard
> Sent: Tuesday, February 15, 2011 7:23 PM
> To: bc2000@yahoogroups.com
> Subject: [bc2000] Pro Tools compatibility
>  
>   
> Hi
> Does anyone know if the BCF2000 will work with my  ProTools V7.4 system. I
> cant find anything in the Behringer bumpf which say it does  but I cant see
> why it wont. 
> Any info greatly received before I purchase one
>  
> Thanks in advance
> Tony
>