Bc2000 (for the BCF2000 & BCR2000)

Thanks folks!  I was thinking this, but wasn't sure.  I'm on a mac, and have tried desperately to get that software to work through wine, etc but no avail.  What a headache!  

If someone wanted to post a JX-10 template, that would be amazing.  

--- In bc2000@yahoogroups.com, "baumont987" <geebeex@...> wrote:
>
> Hi,
> 
> Withe the Colin Fraser update, the JX does not send Sysex, but does only
> receive them.
> 
> The easiest way to control the JX-10 with the BCF is to use the GB-800
> software, it's a PG-800 emulator that can handle automation:
> http://greg.baumont.free.fr/?page_id=158&lang=en
> <http://greg.baumont.free.fr/?page_id=158&lang=en>
> 
> 
> --- In bc2000@yahoogroups.com, "thermos1979" <natewood@> wrote:
> >
> > Hi Folks.  I've got a JX-10 with the Colin Fraser rom in it.  The
> other 2 roms are 1.9.  Will these older roms inhibit sysex in any way?
> >
> > And what magic trick am I missing to get learn mode to work between
> the jx 10 and the BCR20000?  I can get it to learn/see key presses on
> the JX as well as the c2 slider, but not any of the parameters with the
> alpha wheel.  Am I missing something?
> >
>